Board index FlightGear Support Installation

2018.3 Release

Need help getting up and running? Installing FlightGear, add-on planes, sceneries etc.
Forum rules
In order to help you, we need to know a lot of information. Make sure to include answers to at least the following questions in your initial post.

- what OS (Windows Xp/Vista, Mac etc.) are you running?
- what FlightGear version do you use?
- what graphics card do you have?

Please, also see Requesting Technical Help.

Note: If you did not get a reponse, even after 7 days, you may want to check out the FlightGear mailing lists to ask your question there.

Re: 2018.3 Release

Postby BEL ISAAK » Sat Nov 10, 2018 8:58 pm

You have to subscribe to the mailinglist, you can do that here. Be advised that you will receive tons of emails so some message rules might come in handy.
User avatar
BEL ISAAK
 
Posts: 191
Joined: Sat Jun 04, 2011 2:52 pm
Location: Leuven, Belgium
Callsign: OO-ISA
Version: 2018.2.2
OS: Windows 10

Re: 2018.3 Release

Postby Picun_1812 » Mon Nov 12, 2018 3:33 pm

Hello everyone, thank you very much for the great job you do!

I downloaded the candidate launch of 2018.3.0 in Windows 10 and I have noticed a possible error. In the new flight planner, if you press <see route> before entering data, Flightgear closes automatically without any error.
Picun_1812
 
Posts: 3
Joined: Thu May 10, 2018 7:45 pm

Re: 2018.3 Release

Postby lucrus » Mon Nov 12, 2018 6:06 pm

I've build 2018.3 from sources on Linux (because I wanted to test it, but I couldn't find any 2018.3 precompiled Linux downloads). During startup, when it shows "initializing subsystems", it immediately shuts down and reports the following on the terminal:

Code: Select all
lucio@fx:~/programmi/flightgear/exe$ bin/fgfs
FlightGear:  Version 2018.3.1
FlightGear:  Build Type Dev
Built with GNU C++ version 8.2
Jenkins number/ID 0:none
Settings migrated: Saved settings were migrated from a previous version of FlightGear. If you encounter any problems when using the system, try restoring the default settings, before reporting a problem. Saved settings can affect the appearance, performance and features of the simulator.
FGPropertyManager::GetNode() No node found for hydro/active-norm
Error: caught signal 11:
  /lib/x86_64-linux-gnu/libc.so.6 : ()+0x35fc0
  /usr/lib/x86_64-linux-gnu/libstdc++.so.6 : __dynamic_cast()+0x17
  bin/fgfs : ()+0x1f0565f
  bin/fgfs : SGTextureStateAttributeVisitor::apply(int, std::map<std::pair<osg::StateAttribute::Type, unsigned int>, std::pair<osg::ref_ptr<osg::StateAttribute>, unsigned int>, std::less<std::pair<osg::StateAttribute::Type, unsigned int> >, std::allocator<std::pair<std::pair<osg::StateAttribute::Type, unsigned int> const, std::pair<osg::ref_ptr<osg::StateAttribute>, unsigned int> > > >&)+0x85
  bin/fgfs : SGTextureStateAttributeVisitor::apply(std::vector<std::map<std::pair<osg::StateAttribute::Type, unsigned int>, std::pair<osg::ref_ptr<osg::StateAttribute>, unsigned int>, std::less<std::pair<osg::StateAttribute::Type, unsigned int> >, std::allocator<std::pair<std::pair<osg::StateAttribute::Type, unsigned int> const, std::pair<osg::ref_ptr<osg::StateAttribute>, unsigned int> > > >, std::allocator<std::map<std::pair<osg::StateAttribute::Type, unsigned int>, std::pair<osg::ref_ptr<osg::StateAttribute>, unsigned int>, std::less<std::pair<osg::StateAttribute::Type, unsigned int> >, std::allocator<std::pair<std::pair<osg::StateAttribute::Type, unsigned int> const, std::pair<osg::ref_ptr<osg::StateAttribute>, unsigned int> > > > > >&)+0x64
  bin/fgfs : SGTextureStateAttributeVisitor::apply(osg::StateSet*)+0x43
  bin/fgfs : ()+0x1f0571f
  bin/fgfs : SGTextureStateAttributeVisitor::apply(osg::Geode&)+0x98
  /usr/lib/x86_64-linux-gnu/libosgDB.so.100 : osg::Geode::accept(osg::NodeVisitor&)+0x89
  /usr/lib/x86_64-linux-gnu/libosg.so.100 : osg::Group::traverse(osg::NodeVisitor&)+0x33
  bin/fgfs : osg::NodeVisitor::traverse(osg::Node&)+0x69
  bin/fgfs : SGTextureStateAttributeVisitor::apply(osg::Node&)+0x4f
  bin/fgfs : osg::Group::accept(osg::NodeVisitor&)+0x58
  /usr/lib/x86_64-linux-gnu/libosg.so.100 : osg::Group::traverse(osg::NodeVisitor&)+0x33
  bin/fgfs : osg::NodeVisitor::traverse(osg::Node&)+0x69
  bin/fgfs : SGTextureStateAttributeVisitor::apply(osg::Node&)+0x4f
  bin/fgfs : osg::Group::accept(osg::NodeVisitor&)+0x58
  /usr/lib/x86_64-linux-gnu/libosg.so.100 : osg::Group::traverse(osg::NodeVisitor&)+0x33
  bin/fgfs : osg::NodeVisitor::traverse(osg::Node&)+0x69
  bin/fgfs : SGTextureStateAttributeVisitor::apply(osg::Node&)+0x4f
  bin/fgfs : osg::Group::accept(osg::NodeVisitor&)+0x58
  /usr/lib/x86_64-linux-gnu/libosg.so.100 : osg::Group::traverse(osg::NodeVisitor&)+0x33
  bin/fgfs : osg::NodeVisitor::traverse(osg::Node&)+0x69
  bin/fgfs : SGTextureStateAttributeVisitor::apply(osg::Node&)+0x4f
  bin/fgfs : osg::Group::accept(osg::NodeVisitor&)+0x58
  bin/fgfs : simgear::OptimizeModelPolicy::optimize(osg::Node*, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, osgDB::Options const*)+0x8b
  bin/fgfs : ACOptimizePolicy::optimize(osg::Node*, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, osgDB::Options const*)+0x31
  bin/fgfs : simgear::ModelRegistryCallback<ACProcessPolicy, simgear::DefaultCachePolicy, ACOptimizePolicy, simgear::OSGSubstitutePolicy, simgear::BuildLeafBVHPolicy>::readNode(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, osgDB::Options const*)+0x26e
  bin/fgfs : simgear::ModelRegistry::readNode(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, osgDB::Options const*)+0x139
  /usr/lib/x86_64-linux-gnu/libosgDB.so.100 : osgDB::readNodeFile(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, osgDB::Options const*)+0x1c1
  bin/fgfs : ()+0x1f23f94
  bin/fgfs : simgear::SGReaderWriterXML::readNode(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, osgDB::Options const*) const+0x11b
  bin/fgfs : simgear::ModelRegistryCallback<simgear::DefaultProcessPolicy, simgear::NoCachePolicy, simgear::NoOptimizePolicy, simgear::NoSubstitutePolicy, simgear::BuildLeafBVHPolicy>::loadUsingReaderWriter(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, osgDB::Options const*)+0x90
  bin/fgfs : simgear::ModelRegistryCallback<simgear::DefaultProcessPolicy, simgear::NoCachePolicy, simgear::NoOptimizePolicy, simgear::NoSubstitutePolicy, simgear::BuildLeafBVHPolicy>::readNode(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, osgDB::Options const*)+0x186
  bin/fgfs : simgear::ModelRegistry::readNode(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, osgDB::Options const*)+0x139
  /usr/lib/x86_64-linux-gnu/libosgDB.so.100 : osgDB::readRefNodeFile(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, osgDB::Options const*)+0x1d1
  bin/fgfs : ()+0x1eaa59e
  bin/fgfs : simgear::SGModelLib::loadModel(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, SGPropertyNode*, simgear::SGModelData*, bool)+0x193
  bin/fgfs : ()+0x156734d
  bin/fgfs : FGAircraftModel::init()+0x483
  bin/fgfs : SGSubsystem::incrementalInit()+0x23
  bin/fgfs : SGSubsystemGroup::incrementalInit()+0x148
  bin/fgfs : SGSubsystemMgr::incrementalInit()+0x52
  bin/fgfs : ()+0x1a587df
  bin/fgfs : fgOSMainLoop()+0xce
  bin/fgfs : fgMainInit(int, char**)+0x9d1
  bin/fgfs : main()+0x20b
  /lib/x86_64-linux-gnu/libc.so.6 : __libc_start_main()+0xe7
  bin/fgfs : _start()+0x2a
lucrus
 
Posts: 1
Joined: Mon Nov 12, 2018 5:54 pm

Previous

Return to Installation

Who is online

Users browsing this forum: No registered users and 1 guest