Try setting
/fdm/jsbsim/systems/throttle/throttle-mode
to 1 - this should map to 106%
Thanks.
I changed it directly in the Throttle.xml
( I put correct order, max 109, abort 106 and nominal at 104, works really nice)
- Code: Select all
<switch name="systems/throttle/throttle-factor">
<default value="1.0"/>
<test value="1.09">
systems/throttle/throttle-mode == 1
</test>
<test value="1.06">
systems/throttle/throttle-mode == 2
</test>
<test value="1.04">
systems/throttle/throttle-mode == 3
</test>
</switch>
I'd appreciate if the people running the development branch could test whether the normal rendezvous stuff still works as expected (I don't expect any breakage, but who knows...)
Of course, Time for some Hubble Rendez Vous.
I almost finish my stuff with Ascent AP.
I entered into Auto Launch.nas all the open loop parameters for stage 1.
Even closer to the real path now.
- Code: Select all
if ((getprop("/fdm/jsbsim/velocities/vtrue-fps") > 571.0))
{
setprop("/fdm/jsbsim/systems/ap/launch/pitch-target", 69.4);
setprop("/fdm/jsbsim/systems/ap/launch/pitch-max-rate-norm", 0.04);
}
if ((getprop("/fdm/jsbsim/velocities/vtrue-fps") > 678.0))
{
setprop("/fdm/jsbsim/systems/ap/launch/pitch-target", 68.6);
setprop("/fdm/jsbsim/systems/ap/launch/pitch-max-rate-norm", 0.04);
}
if ((getprop("/fdm/jsbsim/velocities/vtrue-fps") > 747.0))
{
setprop("/fdm/jsbsim/systems/ap/launch/pitch-target", 67.8);
setprop("/fdm/jsbsim/systems/ap/launch/pitch-max-rate-norm", 0.04);
}
if ((getprop("/fdm/jsbsim/velocities/vtrue-fps") > 846.0))
{
setprop("/fdm/jsbsim/systems/ap/launch/pitch-target", 66.2);
setprop("/fdm/jsbsim/systems/ap/launch/pitch-max-rate-norm", 0.04);
}
etc
And a initial roll based on relative speed
- Code: Select all
if (getprop("/fdm/jsbsim/velocities/vtrue-fps") > 120.0)
At Max Q ( 760 and alpha of -2 °, like in the books)
Almost finish with Stage 2.
I changed the H dot target at Meco to Have 270 fps, giving a good inertial FPA for a 120 Nm apogee
On that matter, I was wondering if it was possible to set a Flight path target at MECO instead of Hdot
FPA from that property
into /fdm/jsbsim/systems/ap/launch
That would allow us to pinpoint even more the MECO target based on those datas