Board index FlightGear Development Aircraft Liveries

IDG-A32X Liveries

Discussion of aircraft textures and liveries

Re: IDG-A32X Liveries

Postby OE-LML » Tue Mar 12, 2019 7:44 pm

Hallo!

[...]you cannot start making liveries yet, until the remodelling and reuvmapping is complete.[...]


Short question: Is it complete?
Because I would have one or two request(s). :wink:
OE-LML
 
Posts: 64
Joined: Wed Nov 14, 2018 10:18 pm
Location: irgendwo in der FIR LOVV

Re: IDG-A32X Liveries

Postby legoboyvdlp » Tue Mar 12, 2019 11:07 pm

No, it is not yet complete. It is now in the uvmapping stage, so should not be too much longer
User avatar
legoboyvdlp
 
Posts: 7165
Joined: Sat Jul 26, 2014 1:28 am
Callsign: YV-LEGO
Version: 2018.3.1
OS: Windows 10 HP

Re: IDG-A32X Liveries

Postby Icarus (Greek Wings) » Sat Mar 30, 2019 1:43 pm

I'd like to make a request for the Aegean Airlines A320-232 main livery, not the Star Alliance one. For the record, there are two versions, one standard and one with sharklets. Both are acceptable. It would be great if you could find some time to design them.

Kind regards,
George
Dominate heights!
User avatar
Icarus (Greek Wings)
 
Posts: 35
Joined: Sat Mar 30, 2019 12:13 pm
Location: Greece
Version: 2019.1.1
OS: Windows 7 64-bit

Re: IDG-A32X Liveries

Postby legoboyvdlp » Sat Mar 30, 2019 6:42 pm

As a new 3D model is in progress we are not doing liveries right now since they'd have to be redone when the new model comes ;)

It's in the final stages and will be well worth the wait!
User avatar
legoboyvdlp
 
Posts: 7165
Joined: Sat Jul 26, 2014 1:28 am
Callsign: YV-LEGO
Version: 2018.3.1
OS: Windows 10 HP

Re: IDG-A32X Liveries

Postby OE-LML » Thu May 30, 2019 1:21 pm

Hallo! :D

I just downloaded GIMP, played around and made a simple livery for the LEAP A320neo.
As base I used the "a320.sharklets.paintkit"-file from the paintkit folder.

I added a horizontal band around the lower part of the fuselage.
In FG, when looking at the front of the plane, on one side the stripe is positioned exactly 1 pixel lower than on the other side.
On the middle of the roof there is a little some kind of 2 dimensional ridge visible, although i didn't paint the upper section of the plane.

Am I doing something wrong or is the paintkit a little inaccurate?
Is there somewhere a more precise kit, maybe with higher resolution? And are the other paintkits (PurePower, CFM56, IAE) more accurate?

CU.
Thx in advance.
OE-LML
 
Posts: 64
Joined: Wed Nov 14, 2018 10:18 pm
Location: irgendwo in der FIR LOVV

Re: IDG-A32X Liveries

Postby Octal450 » Thu May 30, 2019 10:06 pm

Hello.
Be advised that the whole 3D is being redesigned (as the current is not very good). It is in the final stages of UVMapping and such.

So pls wait until then, and a new paintkits will be released on my website.

Kind Regards,
Josh
Waste of time. Goodbye forever.
Octal450
 
Posts: 4398
Joined: Tue Oct 06, 2015 12:51 pm

Re: IDG-A32X Liveries

Postby FlyMax » Fri Jul 19, 2019 4:58 pm

Is the 3D model redesign already complete? If yes, where can I update it?

Thanks,
Max
FlyMax
 
Posts: 6
Joined: Sun May 26, 2019 10:58 am

Re: IDG-A32X Liveries

Postby legoboyvdlp » Fri Jul 19, 2019 5:03 pm

No, it's not yet ready.
The texturing is well under way, I believe the gear and fuselage are done as well as the valleys, it's just the details. That's just from memory, I need to check.
We will publish a set of standards shortly as well.
User avatar
legoboyvdlp
 
Posts: 7165
Joined: Sat Jul 26, 2014 1:28 am
Callsign: YV-LEGO
Version: 2018.3.1
OS: Windows 10 HP

Re: IDG-A32X Liveries

Postby FlyMax » Fri Jul 19, 2019 6:01 pm

Thanks! Are you going to publish the set here or where? :?:
FlyMax
 
Posts: 6
Joined: Sun May 26, 2019 10:58 am

Re: IDG-A32X Liveries

Postby legoboyvdlp » Fri Jul 19, 2019 8:56 pm

Standards for A32X liveries:

1. All liveries shall be as far possible exactly like the real aircraft, particularly in terms of logos and colours.
2. All liveries created must have historically been used on the A32X. No fictional liveries will be accepted.
3. The correct engine and options must be used for each livery. Sharklets must only be used if the real aircraft has them. The cockpit variant (once implemented - EIS1/EIS2) must be correct.
4. We will only have one example of each individual livery of an airline - e.g. United Battleship, United, and Star Alliance are fine but not two Battleship.
5. Each livery must be created in 4K (4096 * 4096) resolution.
6. Each livery must match exactly at UV map boundaries - e.g. at the tail and nose where it splits left / right.
7. The description must be in this format: ICAO Airline Name (Extra Info)
8. Liveries must be approved by IDG Team Member before being added. Please have patience!
User avatar
legoboyvdlp
 
Posts: 7165
Joined: Sat Jul 26, 2014 1:28 am
Callsign: YV-LEGO
Version: 2018.3.1
OS: Windows 10 HP

Re: IDG-A32X Liveries

Postby omega13a » Fri Jul 19, 2019 10:22 pm

legoboyvdlp wrote in Fri Jul 19, 2019 8:56 pm:4. We will only have one example of each individual livery of an airline - e.g. United Battleship, United, and Star Alliance are fine but not two Battleship.

We need some rules for Frontier Airlines since technically no two are the same though you can break them down into a few types (green engines, black engines, flyfrontier.com, and whatever you could call the current one). My suggestion is whatever one the team feels looks the best for each type.
Fish need Bicycles!
User avatar
omega13a
 
Posts: 245
Joined: Thu Apr 13, 2017 8:07 am
Location: California

Re: IDG-A32X Liveries

Postby legoboyvdlp » Fri Jul 19, 2019 11:17 pm

In such case - and for instance such as jetBlue and Norwegian only one from each type would be accepted considering the only difference in most cases would be tail logos.
User avatar
legoboyvdlp
 
Posts: 7165
Joined: Sat Jul 26, 2014 1:28 am
Callsign: YV-LEGO
Version: 2018.3.1
OS: Windows 10 HP

Re: IDG-A32X Liveries

Postby Octal450 » Sat Jul 20, 2019 12:35 am

Please also note that we will be supporting "livery packs" that can be installed and place in a specific place separate from the aircraft. You can put whatever you like there.

Kind Regards,
Josh
Waste of time. Goodbye forever.
Octal450
 
Posts: 4398
Joined: Tue Oct 06, 2015 12:51 pm

Re: IDG-A32X Liveries

Postby Ger272 » Sat Jul 20, 2019 8:34 am

Could you please make sure that there is a bottom section for the liveries? It's quiet common now to write stuff on the bottom of the fuselage (SWISS, airberlin, etc.). That would be great!
Download-Links to all available Ger272 liveries:

A320/A319 - A350XWB - A<380 - A310MRTT - C-160 Transall

--- DUE TO THE A320 RE-DESIGN ALL MY A320 TEXTURE AND LIVERY DEVELOPMENTS ARE ON A HOLD ---

For "How to download" check topic: Ger272 HQ Liveries.
Ger272
 
Posts: 222
Joined: Tue Nov 24, 2015 1:13 pm
Location: Germany (EDDT, EDDH, EDDC, EDDP, EDDF)
Callsign: LH390/ BER4EVR
Version: 2017.3.1
OS: Mac OS X 10.12.6

Re: IDG-A32X Liveries

Postby FlyMax » Sat Jul 20, 2019 9:36 am

Once the redesign is complete are the new liveryes going to be added into a32X menu in flightgear?
FlyMax
 
Posts: 6
Joined: Sun May 26, 2019 10:58 am

PreviousNext

Return to Liveries

Who is online

Users browsing this forum: No registered users and 1 guest