So I maybe detailed to much. The AC3D exporter in sketchup crashed each time I try to export the file.
Any Ideas? I even tried to separat the model but it does not help :/
FlightGear Forum
Board index ‹ FlightGear ‹ Development ‹ Scenery
EDDB Scenery
Re: EDDB Scenery Part I
by Ger272 » Thu Mar 15, 2018 8:59 am
Ger272 HQ-Liveries on request:
A350, A320, A380 and Transall
A350, A320, A380 and Transall
- Ger272
- Posts: 226
- Joined: Tue Nov 24, 2015 1:13 pm
- Location: Germany (EDDT, EDDH, EDDC, EDDP, EDDF)
- Callsign: LH390/ BER4EVR
- Version: 2017.3.1
- OS: Mac OS X 10.12.6
Re: EDDB Scenery Part I
by Catalanoic » Thu Mar 15, 2018 7:53 pm
Weird, single or double-face exporter? sketchup version? OS? Do you tried with a small and simple cube or something else to be exported correctly?
-
Catalanoic - Posts: 1072
- Joined: Mon Mar 05, 2012 12:33 am
- Location: Barcelona (LEBL)
- Callsign: Catalanoic
- Version: 2017.3
- OS: Lubuntu/Windows 7
Re: EDDB Scenery Part I
by Ger272 » Thu Mar 15, 2018 8:35 pm
Well I use the exporter which was suggested in FlightGearWiki (http://wiki.flightgear.org/SketchUp_to_AC3D_exporter).I haven't found anything else :/
I dont know whether its a single- or double-face exporter. I just noticed that colors are only shown in FG if both sides of the surfaces are painted (which produces much work -> solution a SketchUp AddOn).
I dont know whether its a single- or double-face exporter. I just noticed that colors are only shown in FG if both sides of the surfaces are painted (which produces much work -> solution a SketchUp AddOn).
Ger272 HQ-Liveries on request:
A350, A320, A380 and Transall
A350, A320, A380 and Transall
- Ger272
- Posts: 226
- Joined: Tue Nov 24, 2015 1:13 pm
- Location: Germany (EDDT, EDDH, EDDC, EDDP, EDDF)
- Callsign: LH390/ BER4EVR
- Version: 2017.3.1
- OS: Mac OS X 10.12.6
Re: EDDB Scenery Part I
by Ger272 » Thu Mar 15, 2018 9:03 pm
Okay I removed all colors, some buildings, grouped and ungrouped... nothing happed. Finally I removed everything and left one cube - it worked :/
So it seems that the model is to complex for the suggested .ac-exporter... Well are there any other .ac-exporters for SketchUp?
So it seems that the model is to complex for the suggested .ac-exporter... Well are there any other .ac-exporters for SketchUp?
Ger272 HQ-Liveries on request:
A350, A320, A380 and Transall
A350, A320, A380 and Transall
- Ger272
- Posts: 226
- Joined: Tue Nov 24, 2015 1:13 pm
- Location: Germany (EDDT, EDDH, EDDC, EDDP, EDDF)
- Callsign: LH390/ BER4EVR
- Version: 2017.3.1
- OS: Mac OS X 10.12.6
Re: EDDB Scenery Part I
by Catalanoic » Thu Mar 15, 2018 10:00 pm
"the model is to complex for the suggested .ac-exporter": I don't think so, as tests some time ago i exported really large projects without crash (maybe some seconds/minutes of freeze) but succefully exported. can you share the project so me or somebody can discover whats wrong?
"Well are there any other .ac-exporters for SketchUp?" No other skecthup exporters but maybe you can find some addons on sketchup community sites, i dont know. An alternative is to save it to a format readable for other 3d modelling software like blender or AC3D, but the best way is to resolve that sketchup issue.
"Well are there any other .ac-exporters for SketchUp?" No other skecthup exporters but maybe you can find some addons on sketchup community sites, i dont know. An alternative is to save it to a format readable for other 3d modelling software like blender or AC3D, but the best way is to resolve that sketchup issue.
-
Catalanoic - Posts: 1072
- Joined: Mon Mar 05, 2012 12:33 am
- Location: Barcelona (LEBL)
- Callsign: Catalanoic
- Version: 2017.3
- OS: Lubuntu/Windows 7
Re: EDDB Scenery Part I
by VicMar » Fri Mar 16, 2018 8:12 am
If you send me your Skp file I'll have a look and see if I can find out why the export is crashing.
I've sent you my email address.
Vic
I've sent you my email address.
Vic
Time flies like an arrow
Fruit flies like a banana
Fruit flies like a banana
-
VicMar - Posts: 2061
- Joined: Sun Apr 06, 2008 5:53 pm
- Location: Lancing. UK (EGKA)
- Callsign: VicMar
- Version: 2018.3.1
- OS: OS X 10.12.6
Re: EDDB Scenery Part I
by Ger272 » Fri Mar 16, 2018 1:13 pm
Dear Vic,
thanks for your help! I send you the file.
Before I tried to export I remove the groundlayer map as it is not needed in FG. I tried to group everything but it didn't help, too.
Maybe you'll find the mistake
thanks for your help! I send you the file.
Before I tried to export I remove the groundlayer map as it is not needed in FG. I tried to group everything but it didn't help, too.
Maybe you'll find the mistake
Ger272 HQ-Liveries on request:
A350, A320, A380 and Transall
A350, A320, A380 and Transall
- Ger272
- Posts: 226
- Joined: Tue Nov 24, 2015 1:13 pm
- Location: Germany (EDDT, EDDH, EDDC, EDDP, EDDF)
- Callsign: LH390/ BER4EVR
- Version: 2017.3.1
- OS: Mac OS X 10.12.6
Re: EDDB Scenery Part I
by Ger272 » Fri Mar 16, 2018 1:25 pm
By the way: I tried to export the model to .dae first and open it in AC3D. Exporting in sketchup works, importing in AC3D fails.
Ger272 HQ-Liveries on request:
A350, A320, A380 and Transall
A350, A320, A380 and Transall
- Ger272
- Posts: 226
- Joined: Tue Nov 24, 2015 1:13 pm
- Location: Germany (EDDT, EDDH, EDDC, EDDP, EDDF)
- Callsign: LH390/ BER4EVR
- Version: 2017.3.1
- OS: Mac OS X 10.12.6
Re: EDDB Scenery Part I
by Ger272 » Tue Mar 20, 2018 10:36 am
Ger272 HQ-Liveries on request:
A350, A320, A380 and Transall
A350, A320, A380 and Transall
- Ger272
- Posts: 226
- Joined: Tue Nov 24, 2015 1:13 pm
- Location: Germany (EDDT, EDDH, EDDC, EDDP, EDDF)
- Callsign: LH390/ BER4EVR
- Version: 2017.3.1
- OS: Mac OS X 10.12.6
Re: EDDB Scenery Part I
by Catalanoic » Tue Mar 20, 2018 2:01 pm
Really nice! sketchup exporter worked?
-
Catalanoic - Posts: 1072
- Joined: Mon Mar 05, 2012 12:33 am
- Location: Barcelona (LEBL)
- Callsign: Catalanoic
- Version: 2017.3
- OS: Lubuntu/Windows 7
Re: EDDB Scenery Part I
by Ger272 » Tue Mar 20, 2018 2:29 pm
Thanks Yes, thanks to Vic!
Yes, thanks to Vic!Ger272 HQ-Liveries on request:
A350, A320, A380 and Transall
A350, A320, A380 and Transall
- Ger272
- Posts: 226
- Joined: Tue Nov 24, 2015 1:13 pm
- Location: Germany (EDDT, EDDH, EDDC, EDDP, EDDF)
- Callsign: LH390/ BER4EVR
- Version: 2017.3.1
- OS: Mac OS X 10.12.6
Re: EDDB Scenery Part I
by Ger272 » Fri Apr 13, 2018 3:03 pm
Ger272 HQ-Liveries on request:
A350, A320, A380 and Transall
A350, A320, A380 and Transall
- Ger272
- Posts: 226
- Joined: Tue Nov 24, 2015 1:13 pm
- Location: Germany (EDDT, EDDH, EDDC, EDDP, EDDF)
- Callsign: LH390/ BER4EVR
- Version: 2017.3.1
- OS: Mac OS X 10.12.6
Re: EDDB Scenery Part I
by Ger272 » Fri Apr 13, 2018 8:45 pm
Ger272 HQ-Liveries on request:
A350, A320, A380 and Transall
A350, A320, A380 and Transall
- Ger272
- Posts: 226
- Joined: Tue Nov 24, 2015 1:13 pm
- Location: Germany (EDDT, EDDH, EDDC, EDDP, EDDF)
- Callsign: LH390/ BER4EVR
- Version: 2017.3.1
- OS: Mac OS X 10.12.6
Re: EDDB Scenery Part I
by Ger272 » Sat Apr 14, 2018 9:13 pm
Ger272 HQ-Liveries on request:
A350, A320, A380 and Transall
A350, A320, A380 and Transall
- Ger272
- Posts: 226
- Joined: Tue Nov 24, 2015 1:13 pm
- Location: Germany (EDDT, EDDH, EDDC, EDDP, EDDF)
- Callsign: LH390/ BER4EVR
- Version: 2017.3.1
- OS: Mac OS X 10.12.6
Re: EDDB Scenery Part I
by wkitty42 » Mon Apr 16, 2018 12:15 am
is this going to be put into terrasync??
"You get more air close to the ground," said Angalo. "I read that in a book. You get lots of air low down, and not much when you go up."
"Why not?" said Gurder.
"Dunno. It's frightened of heights, I guess."
"Why not?" said Gurder.
"Dunno. It's frightened of heights, I guess."
-
wkitty42 - Posts: 6661
- Joined: Fri Feb 20, 2015 3:46 pm
- Location: central NC, USA
- Callsign: wk42
- Version: git next
- OS: Kubuntu 20.04
Who is online
Users browsing this forum: No registered users and 3 guests