Version 4.310 has just been commited to FGAddon. Will probably show up in the launcher later today or tomorrow with some luck.
Some highlights are:A/P rewamp by it0uchpods
Symbology of HUD changed to be more authentic (mainly affect the tactical stuff)
Removed auto-follow feature.
Increased functionality of display cursor
Bulls-eye, FF pilot points and LV-areas added.
Startup states for FG 2018.1.1
Metric/Imperial setting is no longer saved between sessions.
Changelog since 4.308:----
Control: {it0uchpods} Fixed many A/P bugs.
Control: {it0uchpods} Fixed roll hold being affected by wind.
Control: {it0uchpods} Fixed pitch hold worked only with integers.
Control: {it0uchpods} Fixed A/P oscilations.
Control: {it0uchpods} Upgrade A/P rate based control system to latest IV system.
Sim: Fixed that some method were called to change canvas, before the script they were changing had been loaded.
HUD: Upper half squares is now radar echoes, with the selection having velocity vector and distance to set it apart.
HUD: Upper semi circle is now radar lock.
HUD: Lower semi circle is now IR lock. If radar is active and locked also, radar lock can show at same time.
HUD: Removed text from radar selection in the JA, its already in MI/TI displays.
HUD: No special symbols for ships or ground forces anymore. I still lack some info on the HUD symbology, but it looks like they did not have a symbol.
HUD: Removed lock diamond symbol also. Small IR seeker diamond is still there.
TI: ECM log will now also say when radar is turned silent or active.
Model: Removed radar screen switch from JA variants. Its now only in AJ variants for the CI display.
GUI: Removed Auto-follow from help, since its scheduled for removal soon, to be replaced with steering order from radar.
Test: Improved testing results for systems actually damaged.
Model: Added tooltips for circuit breakers.
TI: Fixed that after switching displays off, it would not allow to switch them back on.
Sim: Replaced auto-follow with radar steer order mode (RR). Use TI to enable when airborne.
TI: Heading bug will now show radar steer order.
HUD: Heading bug will now show radar steer order.
TI: Moved Radar selection infobox to right side, and allow it to show at same time as steerpoint infobox.
TI: Text info of radar selection in bottom field is now only shown at radar steer order.
TI: White circle around steer order symbol (steerpoints and radar selections).
Effect: Fixed that g-suit option would not change in options dialog.
Effect: G-suit setting is now persistent between sessions. default is JA/AJS=1979 AJ=1971.
DAP: Made room for more digit in data panel, when inputting longitude to TI237, for the negative sign.
Model: Added tooltips to frame of TI and Mi displays.
Sim: Added options in launcher 2018.1.1+ to startup with engines on.
Sim: Due to the new startup state options, interoperability setting is no longer saved between sessions.
TI: Cursor can now select a steerpoint (outside MSDA menu), it will then be active for steer order. Same with radar echoes.
TI: Moved steerpoint name on map a little further away from the steerpoint so the steer order circle do not overlap it.
TI: Can now show/edit bulls-eye.
TI: Bulls-eye infobox shows relation from bulls-eye to cursor. When cursor is in SVY or bottom textfield, infobox turns off.
DAP: Can now edit or delete bulls-eye (edit LV-area 179).
TI: When cursor not active bulls-eye show relation to radar selection.
TI: Bulls-eye infobox now uses degree symbol.
Sim: Authors listed in Launcher now includes it0uchpods and Spectre, since the authors font is smaller in 2018.1.1.
TI: The cursor is now able to select and command steer order on aircraft on SVY instead of randomly whats behind it.
TI: SVY is no longer shown in MSDA menu. (not 100% sure this is correct, but it makes sense..)
TI: Made bulls-eye symbol smaller.
TI: GPS now goes through Build In Test before initializing.
DAP: If GPS is installed can now be input/output.
Docs: Fixed typo in DAP-FPLDATA address 15.
TI: Made the 2Hz blinking more steady.
TI: Will now report low battery.
Docs: Updated JA readme with bulls-eye menu item and heatseeker specific items.
HUD: Fixed some code that used radar to get info on IR lock, instead of missile.
MI: Cursor can now select and unselect radar echoes. And cursor speed doubled.
Sim: Startup with engines on, now give no masterwarning from empty battery.
TI: SYST-TRAP-ALL menu item is now functional.
TI: As per manual flight horizon and FPI is now in OFF state per default.
TI: Flight data is now also shown in CLR when pitch is below 10 degree negative.
Model: Added some tooltips to the left radio panel.
Sim: When loading up with engines on the INS should now be finished initializing.
DAP: FF and LV points can now be input/output.
TI: Can now show LV/FF points.
TI: Removed functionality of menu item CONF-GPS-FIX, since it was doing something else than this function really was for.
DAP: LS/SKU button is now used in the JA37Di to send a request to delete a value when inputting to the TI.
TI: Manual event now shows human readable lat/lon instead of doubles. Also made it contain just the info the manual states it should have.
TI: Fixed that if bulls-eye is loaded before cursor is on TI, putting the cursor on TI would produce an error.
TI: Fixed inputing lon/lat of map-area points with DAP would blink the wrong field.