Board index FlightGear Development Aircraft

IDG A33X Development Archive - Closed

Questions and discussion about creating aircraft. Flight dynamics, 3d models, cockpits, systems, animation, textures.

Re: IDG A33X Development

Postby Octal450 » Wed Dec 13, 2017 2:11 am

The displays getting stuck sometimes is fixed.

Josh
Waste of time. Goodbye forever.
Octal450
 
Posts: 4398
Joined: Tue Oct 06, 2015 12:51 pm

Re: IDG A33X Development

Postby Darkriser » Wed Dec 13, 2017 9:56 am

it0uchpods wrote in Tue Dec 12, 2017 3:35 pm:It won't do that, if you filled out the MCDU properly...

Absolutely true, confirmed.
I did enter some details into MCDU before, but obviously not enough to activate SRS.
Now it's working perfectly...

Unfortunately, I wasn't able to fly for some time and this plane is evolving so rapidly that now I'm almost unable to fly it....or at least to fly it properly.
Which means it's becoming more and more complex (read awesome) and I love it...

Thanks guys...
Darkriser
 
Posts: 64
Joined: Wed Dec 28, 2016 12:27 pm
Location: LZIB
Version: next
OS: Arch Linux

Re: IDG A33X Development

Postby Octal450 » Wed Dec 13, 2017 1:50 pm

Lol
Welcome back!

SRS is available on entering V speeds.

Thanks and Kind Regards,
Josh
Waste of time. Goodbye forever.
Octal450
 
Posts: 4398
Joined: Tue Oct 06, 2015 12:51 pm

Re: IDG A33X Development

Postby Octal450 » Fri Dec 15, 2017 3:08 am

I have installed a new LNAV System and Waypoint Advancer Calculator. Please report any stupid behavior.

Kind Regards,
Josh
Waste of time. Goodbye forever.
Octal450
 
Posts: 4398
Joined: Tue Oct 06, 2015 12:51 pm

Re: IDG A33X Development

Postby Octal450 » Fri Dec 15, 2017 3:29 pm

I fixed the bus's which is powered by the RAT, and fixed the logic of the AC/DC ESS, and SHED buses.

Also, each DU is now powered by the correct bus, as according to the FCOM.

And fixed a minor bug in the A330's electrical system.

Kind Regards,
Josh
Waste of time. Goodbye forever.
Octal450
 
Posts: 4398
Joined: Tue Oct 06, 2015 12:51 pm

Re: IDG A33X Development

Postby flight505 » Sun Dec 17, 2017 11:09 pm

What is wrong with my a330?
Something went wrong with my game, can someone help me?
How to upload image ?
flight505
 
Posts: 6
Joined: Sun Dec 17, 2017 11:05 pm
Callsign: CPA941
Version: 2018.1.1
OS: Mac OS X

Re: IDG A33X Development

Postby Octal450 » Sun Dec 17, 2017 11:12 pm

You can upload image to postimage.org

Then link, here.

Then maybe can help.

Kind Regards,
Josh
Waste of time. Goodbye forever.
Octal450
 
Posts: 4398
Joined: Tue Oct 06, 2015 12:51 pm

Re: IDG A33X Development

Postby flight505 » Sun Dec 17, 2017 11:19 pm

it0uchpods wrote in Sun Dec 17, 2017 11:12 pm:You can upload image to postimage.org

Then link, here.

Then maybe can help.

Kind Regards,
Josh

Thank you so much for your kindly reply,
https://s8.postimg.org/mbf3elx79/2017-12-18_07.04.13.png
Here is the problem,I've download the a330 zip package from flightgear wiki and gitHub. After I've put the a330 folder into the flightgear and load into the game, this is what happens...
I've tried the other aircraft like 777 and a340, they don't have the same problem. Have I done anything wrong ?
Thanks
flight505
 
Posts: 6
Joined: Sun Dec 17, 2017 11:05 pm
Callsign: CPA941
Version: 2018.1.1
OS: Mac OS X

Re: IDG A33X Development

Postby Octal450 » Sun Dec 17, 2017 11:32 pm

When you download it appears as "IDG-A33X-master", right? You need to remove -master from the name, to "IDG-A33X", then it is fixed!

Hope it is fixed for you.

Kind Regards,
Josh
Waste of time. Goodbye forever.
Octal450
 
Posts: 4398
Joined: Tue Oct 06, 2015 12:51 pm

Re: IDG A33X Development

Postby flight505 » Mon Dec 18, 2017 1:01 am

it0uchpods wrote in Sun Dec 17, 2017 11:32 pm:When you download it appears as "IDG-A33X-master", right? You need to remove -master from the name, to "IDG-A33X", then it is fixed!

Hope it is fixed for you.

Kind Regards,
Josh


Thank you so much
flight505
 
Posts: 6
Joined: Sun Dec 17, 2017 11:05 pm
Callsign: CPA941
Version: 2018.1.1
OS: Mac OS X

Re: IDG A33X Development

Postby Octal450 » Mon Dec 18, 2017 1:53 am

Of course -- enjoy.

Kind Regards,
Josh
Waste of time. Goodbye forever.
Octal450
 
Posts: 4398
Joined: Tue Oct 06, 2015 12:51 pm

Re: IDG A33X Development

Postby Octal450 » Thu Dec 21, 2017 5:11 am

Reworked the FCS in the same manner as the IDG-A32X, of course, changed for A33X, and without the speedbrake limitation with AP on.

Also, fixed flare mode at incorrect altitude

And all other bugfixes/and improvements from A32X have been ported over.

Work in progress, to the FBW, is this thing: http://prntscr.com/hqda04 :)

Enjoy.

Kind Regards,
Josh
Waste of time. Goodbye forever.
Octal450
 
Posts: 4398
Joined: Tue Oct 06, 2015 12:51 pm

Re: IDG A33X Development

Postby Octal450 » Thu Dec 21, 2017 6:01 pm

Added another A33X exclusive thing: Maneuver Load Allevation:
Image

It works just as advertised: http://prntscr.com/hqda04

The FBW max G is 2.5 in clean config, so it will let you pull up to 2.5 (my stick was aft the whole time, you can see the G remained at max 2.49ish). This system reduce the stress on the wings.

Kind Regards,
Josh
Waste of time. Goodbye forever.
Octal450
 
Posts: 4398
Joined: Tue Oct 06, 2015 12:51 pm

Re: IDG A33X Development

Postby berkut » Fri Dec 22, 2017 11:30 am

I can't set a thing in this aircraft,when I want to simply turn a knob,it's zooming in...

Any way around it?
A winner is a dreamer who never gives up...
berkut
 
Posts: 540
Joined: Tue Aug 19, 2014 8:58 pm
Location: Banja Luka,Republic of Srpska.
Callsign: Berkut
Version: 2017 3 1
OS: Windows 7

Re: IDG A33X Development

Postby iamzac » Fri Dec 22, 2017 12:39 pm

it0uchpods wrote in Thu Dec 21, 2017 6:01 pm:Added another A33X exclusive thing: Maneuver Load Allevation:


Pretty cool.
While trying to see it with A330-343, I found this small visual bug where the gear clips though the wing when the wing flexes (first two pictures): https://imgur.com/a/ytGxW

A quick fix I done in my local copy is to add these in a333-animations.xml:

Code (): Select all
<animation>
<type>select</type>
<object-name>RightGear</object-name>
<condition>
<greater-than>
<property>gear/gear[2]/position-norm</property>
<value>0</value>
</greater-than>
</condition>
</animation>

<animation>
<type>select</type>
<object-name>LeftGear</object-name>
<condition>
<greater-than>
<property>gear/gear[1]/position-norm</property>
<value>0</value>
</greater-than>
</condition>
</animation>


Or you can rotate it with the wing flex.
It still clips for a bit through the upper wing while closing so maybe the animation needs a bit of tweaking.
There still are some issues with the base of the wing while flexing and also with how the gear door closes which you can see in the third picture from the imgur link.
iamzac
 
Posts: 96
Joined: Fri Nov 07, 2014 7:52 am
OS: Windows / Kubuntu

PreviousNext

Return to Aircraft

Who is online

Users browsing this forum: Google [Bot], MSN [Bot] and 1 guest