They do work. however, you need to enable the Model Shader in View > Rendering > Custom Shader Settings
Edit: Sorry, thought this was A320 topic!
The A330 logo light is INOP.
in the IDG-A32X thread, it0uchpods wrote:1) The CRS bar in LS or VOR modes of the ND will now line up with the heading correctly.
2) The missing white VOR arrows now appear, in all nav display modes except PLAN
3) Heading preselect is no longer buggy, and will work, even in NAV mode.
4) Heading now is available to pre-select on the ground
<ixy unit="SLUG*FT2">0</ixy>
<ixz unit="SLUG*FT2">0</ixz>
<iyz unit="SLUG*FT2">0</iyz>
<emptywt unit="LBS">268800</emptywt>
<weight n="0">
<name>Cockpit Crew</name>
<weight-lb alias="/fdm/jsbsim/inertia/pointmass-weight-lbs[0]" />
<min-lb type="double">200</min-lb>
<max-lb type="double">3000</max-lb>
</weight>
<weight n="1">
<name>Passengers</name>
<weight-lb alias="/fdm/jsbsim/inertia/pointmass-weight-lbs[1]" />
<min-lb type="double">2000</min-lb>
<max-lb type="double">69300</max-lb>
</weight>
<weight n="2">
<name>Forward Cargo</name>
<weight-lb alias="/fdm/jsbsim/inertia/pointmass-weight-lbs[2]" />
<min-lb type="double">0</min-lb>
<max-lb type="double">11500</max-lb>
</weight>
<weight n="3">
<name>Aft Cargo</name>
<weight-lb alias="/fdm/jsbsim/inertia/pointmass-weight-lbs[3]" />
<min-lb type="double">0</min-lb>
<max-lb type="double">12000</max-lb>
</weight>
<weight n="4">
<name>Rear Bulk Cargo</name>
<weight-lb alias="/fdm/jsbsim/inertia/pointmass-weight-lbs[4]" />
<min-lb type="double">0</min-lb>
<max-lb type="double">4500</max-lb>
</weight>
</payload>
it0uchpods wrote in Thu Nov 16, 2017 6:28 pm:I don't know what you are saying sorry.
Kind Regards,
Josh
Users browsing this forum: No registered users and 25 guests