Hi,
New cabin light, and a DME with tooltips, and textured like the others instruments.
Uploaded in my hangar:
http://pattenflightgear.wifeo.com/dhc6- ... -otter.php
Thanks to abassign and primtala2.
Patten
Patten wrote in Tue Nov 11, 2014 6:53 pm:Hi,
New cabin light, and a DME with tooltips, and textured like the others instruments.
Uploaded in my hangar:
http://pattenflightgear.wifeo.com/dhc6- ... -otter.php
Thanks to abassign and primtala2.
Patten
Patten wrote in Tue Nov 11, 2014 6:53 pm:Hi,
New cabin light, and a DME with tooltips, and textured like the others instruments.
Uploaded in my hangar:
http://pattenflightgear.wifeo.com/dhc6- ... -otter.php
Thanks to abassign and primtala2.
Patten
lanbo64 wrote in Tue Nov 25, 2014 7:58 am:I know a little programming, but I don't know how to do the pitch-for-speed in FlightGear. Even the great B1900D model fails in this part, the IAS is useless. But I like to help if you need.
Sincerely
Bo
Patten wrote in Tue Nov 25, 2014 12:05 pm:Thanks, no problem, when you want...
<filter>
<name>AP:Pitch sample and hold</name>
<debug>false</debug>
<enable>
<condition>
<property>controls/autopilot/settings/iasflag</property>
</condition>
</enable>
<type>gain</type>
<gain>10.0</gain>
<input>instrumentation/airspeed-indicator/indicated-speed-kt</input>
<reference>autopilot/settings/target-speed-kt</reference>
<output>autopilot/internal/target-pitch-deg</output>
<max>30</max>
<min>-30</min>
</filter>
<pi-simple-controller>
<name>flc</name>
<debug>false</debug>
<enable>
<condition>
<or>
<equals>
<property>/autopilot/locks/altitude</property>
<value>FLC</value>
</equals>
<equals>
<property>/autopilot/locks/altitude</property>
<value>VFLC</value>
</equals>
</or>
</condition>
</enable>
<input>
<prop>orientation/pitch-deg</prop>
</input>
<reference>
<prop>autopilot/internal/target-pitch-deg</prop>
</reference>
<output>
<prop>controls/flight/elevator</prop>
</output>
<config>
<Kp>-0.06</Kp> <!-- proportional gain -->
<beta>1.0</beta> <!-- input value weighing factor -->
<alpha>0.1</alpha> <!-- low pass filter weighing factor -->
<gamma>0.0</gamma> <!-- input value weighing factor for -->
<!-- unfiltered derivative error -->
<Ti>1.0</Ti> <!-- integrator time -->
<Td>0.00001</Td> <!-- derivator time -->
<u_min>-0.5</u_min>
<u_max>0.5</u_max>
</config>
</pi-simple-controller>
<pi-simple-controller>
<name>Altitude Hold (Altimeter based) Stage 1</name>
<debug>false</debug>
<enable>
<prop>autopilot/locks/altitude</prop>
<value>altitude-hold</value>
</enable>
<input>
<prop>instrumentation/altimeter/indicated-altitude-ft</prop>
</input>
<reference>
<prop>autopilot/settings/target-altitude-ft</prop>
</reference>
<output>
<prop>autopilot/internal/target-climb-rate-fps</prop>
</output>
<config>
<Kp>0.3</Kp>
<Ki>0.0</Ki>
<u_min>-33.3</u_min>
<u_max>33.3</u_max>
</config>
</pi-simple-controller>
abassign wrote in Mon Dec 15, 2014 3:29 pm:It is really very nice, but the autostart now does not work Though certainly not realistic, but take the DHC6 and make a flight around the airport without having to wait to start the engines, sometime, is fantastic !
Users browsing this forum: No registered users and 14 guests