SH-60B Development

[x7cusick8x]

This thread follows the development of the SH-60B you can download the most recent released version in this thread:
V1.2 updated
https://www.dropbox.com/sh/2es5zr6sdo0nmps/QG0yxHmg0j

[Jetman.]

Looks very nice! I have trouble flying the UH-60 (it HAS to be un-flyable) . I will definitely try this one out!

[StuartC]

Our version of the Blackhawk has got an awfull FDM. Heli FDM's are still something im not good enough at yet.
I had intended to add the SH-60 to the line up, but never got round to it, so well done to you for doing it.

[DutchPilotMitchell]

Me like much

[x7cusick8x]

PM me if anyone would like to test fly it

[x7cusick8x]

*Update* FDM has been reworked and is flying with some help from a donor FDM

still needs
accurate interior
fix cockpit view issue

[StuartC]

The scale appears to be off slightly. The Blackhawk interior you used in sticking through it. The Basic interior from the blackhawk should fit it.

[DutchPilotMitchell]

Hey, I think you should just put a download link here that is regularly updated instead of getting an overloaded PM box hehe.

I've flown it before the update..Quite unusable and the main rotorblades were gone. Can't wait to see the whole thing finished though, a blackhawk (seahawk whatever) is a must have for me!

[x7cusick8x]

Hey, I think you should just put a download link here that is regularly updated instead of getting an overloaded PM box hehe.

I've flown it before the update..Quite unusable and the main rotorblades were gone. Can't wait to see the whole thing finished though, a blackhawk (seahawk whatever) is a must have for me!

the main rotors were gone?

[x7cusick8x]

Link Removed.

[Jetman.]

Just did a quick test of the Seahawk.

Flies very smoothly; I find it is easy to hover and easy to maneuver. Good job!

[x7cusick8x]

any issues with the missing rotor?

[x7cusick8x]

So far this project is kinda like a frankenstine, the FDM is a modified MI-24 FDM by helijah, the interior and rotors are from the FGUK HD blackhawk that were modified (soon to be replaced with an accurate interior) and the 3D model is from the Vinson battle group. i felt it was necessary to give more credit then just in the scripts thank you everyone

[x7cusick8x]

Cockpit view fixed update coming soon

[Muffinman]

The main rotor issue that DutchPilotMitchell reported is due to a dependency on the UH-60. Here is the new code that works. Just replace the old tail and main rotor.xml's with this code:

tailrotor.xml

Code: Select all

<?xml version="1.0" encoding="UTF-8"?>

<PropertyList>

  <path>tailrotor.ac</path>

  <animation>
    <object-name>rotortail</object-name>
  </animation>

  <!-- Blades -->
  <model>
    <name>Blade1</name>
    <path>Aircraft/SH-60/Models/TailRotor/blade.xml</path>
    <offsets>
      <x-m> 0.000 </x-m>
      <y-m> 0.000 </y-m>
      <z-m> 0.000 </z-m>
      <roll-deg>    0.000 </roll-deg>
      <pitch-deg>   0.000 </pitch-deg>
      <heading-deg> 0.000 </heading-deg>
    </offsets>
  </model>

  <model>
    <name>Blade2</name>
    <path>Aircraft/SH-60/Models/TailRotor/blade.xml</path>
    <offsets>
      <x-m> 0.000 </x-m>
      <y-m> 0.000 </y-m>
      <z-m> 0.000 </z-m>
      <roll-deg>     0.000 </roll-deg>
      <pitch-deg>    0.000 </pitch-deg>
      <heading-deg> 90.000 </heading-deg>
    </offsets>
  </model>

  <model>
    <name>Blade3</name>
    <path>Aircraft/SH-60/Models/TailRotor/blade.xml</path>
    <offsets>
      <x-m> 0.000 </x-m>
      <y-m> 0.000 </y-m>
      <z-m> 0.000 </z-m>
      <roll-deg>      0.000 </roll-deg>
      <pitch-deg>     0.000 </pitch-deg>
      <heading-deg> 180.000 </heading-deg>
    </offsets>
  </model>

  <model>
    <name>Blade4</name>
    <path>Aircraft/SH-60/Models/TailRotor/blade.xml</path>
    <offsets>
      <x-m> 0.000 </x-m>
      <y-m> 0.000 </y-m>
      <z-m> 0.000 </z-m>
      <roll-deg>      0.000 </roll-deg>
      <pitch-deg>     0.000 </pitch-deg>
      <heading-deg> 270.000 </heading-deg>
    </offsets>
  </model>

  <animation>
    <name>rotorcomplet</name>
    <object-name>rotortail</object-name>
    <object-name>Blade1</object-name>
    <object-name>Blade2</object-name>
    <object-name>Blade3</object-name>
    <object-name>Blade4</object-name>
  </animation>

  <!-- Rotation du rotor -->
  <animation>
    <type>rotate</type>
    <object-name>rotorcomplet</object-name>
    <property>rotors/main/blade[0]/position-deg</property>
    <center>
       <x-m> 0.000 </x-m>
       <y-m> 0.000 </y-m>
       <z-m> 0.000 </z-m>
    </center>
    <axis>
      <x>  0.000 </x>
      <y>  0.000 </y>
      <z>  1.000 </z>
    </axis>
  </animation>

</PropertyList>

mainrotor.xml

Code: Select all

<?xml version="1.0" encoding="UTF-8"?>

<PropertyList>

  <path>mainrotor.ac</path>

  <animation>
    <object-name>rotorup</object-name>
  </animation>

  <!-- Blades -->
  <model>
    <name>Blade1</name>
    <path>Aircraft/SH-60/Models/MainRotor/blade.xml</path>
    <offsets>
      <x-m> 0.000 </x-m>
      <y-m> 0.000 </y-m>
      <z-m> 0.000 </z-m>
      <roll-deg>    0.000 </roll-deg>
      <pitch-deg>   0.000 </pitch-deg>
      <heading-deg> 0.000 </heading-deg>
    </offsets>
  </model>

  <model>
    <name>Blade2</name>
    <path>Aircraft/SH-60/Models/MainRotor/blade.xml</path>
    <offsets>
      <x-m> 0.000 </x-m>
      <y-m> 0.000 </y-m>
      <z-m> 0.000 </z-m>
      <roll-deg>     0.000 </roll-deg>
      <pitch-deg>    0.000 </pitch-deg>
      <heading-deg> 90.000 </heading-deg>
    </offsets>
  </model>

  <model>
    <name>Blade3</name>
    <path>Aircraft/SH-60/Models/MainRotor/blade.xml</path>
    <offsets>
      <x-m> 0.000 </x-m>
      <y-m> 0.000 </y-m>
      <z-m> 0.000 </z-m>
      <roll-deg>      0.000 </roll-deg>
      <pitch-deg>     0.000 </pitch-deg>
      <heading-deg> 180.000 </heading-deg>
    </offsets>
  </model>

  <model>
    <name>Blade4</name>
    <path>Aircraft/SH-60/Models/MainRotor/blade.xml</path>
    <offsets>
      <x-m> 0.000 </x-m>
      <y-m> 0.000 </y-m>
      <z-m> 0.000 </z-m>
      <roll-deg>      0.000 </roll-deg>
      <pitch-deg>     0.000 </pitch-deg>
      <heading-deg> 270.000 </heading-deg>
    </offsets>
  </model>

  <animation>
    <name>rotorcomplet</name>
    <object-name>rotorup</object-name>
    <object-name>Blade1</object-name>
    <object-name>Blade2</object-name>
    <object-name>Blade3</object-name>
    <object-name>Blade4</object-name>
  </animation>

  <!-- Rotation du rotor -->
  <animation>
    <type>rotate</type>
    <object-name>rotorcomplet</object-name>
    <property>rotors/main/roll-deg</property>
    <center>
       <x-m> 0.000 </x-m>
       <y-m> 0.000 </y-m>
       <z-m> 0.000 </z-m>
    </center>
    <axis>
      <x> 1.000 </x>
      <y> 0.000 </y>
      <z> 0.000 </z>
    </axis>
  </animation>

  <animation>
    <type>rotate</type>
    <object-name>rotorcomplet</object-name>
    <property>rotors/main/yaw-deg</property>
    <center>
       <x-m> 0.000 </x-m>
       <y-m> 0.000 </y-m>
       <z-m> 0.000 </z-m>
    </center>
    <axis>
      <x> 0.000 </x>
      <y>-1.000 </y>
      <z> 0.000 </z>
    </axis>
  </animation>

  <animation>
    <type>rotate</type>
    <object-name>rotorcomplet</object-name>
    <property>rotors/main/blade[0]/position-deg</property>
    <center>
       <x-m> 0.000 </x-m>
       <y-m> 0.000 </y-m>
       <z-m> 0.000 </z-m>
    </center>
    <axis>
      <x>  0.000 </x>
      <y>  0.000 </y>
      <z>  1.000 </z>
    </axis>
  </animation>

</PropertyList>