To Helijah: i need your help to improve the 3D model of Spaceshipone and add some animation to it,esp the gears.
This is some picture of the aircraft at above 100.000 feet.
You can see the earth is round,indeed.
The in-flight HUD at above 133600,max altitude still wait to improve.
Here is the yasim in Blender
In mean time i still working to distribute it with Helijah so when it done you can see it at Helijah hangar,may be
and here is the code
- Code: Select all
<airplane mass="2640">
<approach speed="110" aoa="6.5" fuel="0.0">
<control-setting axis="/controls/engines/engine[0]/throttle" value="0.2"/>
<control-setting axis="/controls/flight/flaps" value="1"/>
<control-setting axis="/controls/gear/gear-down" value="1"/>
</approach>
<cruise speed="1450" alt="19500" fuel="1.0">
<control-setting axis="/controls/engines/engine[0]/throttle" value="1"/>
<control-setting axis="/controls/flight/flaps" value="0.0"/>
<control-setting axis="/controls/gear/gear-down" value="0"/>
</cruise>
<cockpit x="-1.5" y="0.0" z="0.0"/>
<!-- Nose -->
<fuselage ax="0" ay="0" az="0" bx="-1.9" by="0" bz="0" width="1.763" taper="0" midpoint="1"/>
<fuselage ax="-1.85" ay="0" az="0" bx="-6" by="0" bz="0.18" width="1.763" taper="0.85" midpoint="0"/>
<fuselage ax="-5.95" ay="0" az="0.18" bx="-7.5" by="0" bz="0.18" width="1.5" taper="0.6" midpoint="0"/>
<wing x="-4.2" y="0.75" z="0.5"
chord="3.8"
length="1.9"
taper="0.85"
camber="0.07"
dihedral="0"
sweep="15" >
<stall aoa="16" width="3" peak="1.3"/>
<flap0 start="0.063" end="0.923" lift="1.3" drag="1.5"/>
<flap1 start="0.573" end="0.945" lift="1.1" drag="1.0"/>
<control-input axis="/controls/flight/flaps" control="FLAP0"/>
<control-input axis="/controls/flight/aileron" control="FLAP1" square="true" split="true"/>
<control-input axis="/controls/flight/aileron-trim" control="FLAP1" split="true"/>
<control-output control="FLAP0" prop="/surface-positions/flap-pos-norm"/>
<control-output control="FLAP1" prop="/surface-positions/left-aileron-pos-norm" side="left"/>
<control-output control="FLAP1" prop="/surface-positions/right-aileron-pos-norm" side="right"/>
<control-output control="FLAP1" prop="/surface-positions/aileron-pos-norm"/>
</wing>
<vstab x="-8.231" y="2.684" z="0.567"
chord="2.385"
length="1.410"
sweep="30"
taper="0.45">
<stall aoa="16" width="5" peak="1.5"/>
<flap0 start="0" end="0.9" lift="1.8" drag="1.3"/>
<control-input axis="/controls/flight/rudder" control="FLAP0" invert="true"/>
<control-input axis="/controls/flight/rudder-trim" control="FLAP0" invert="true"/>
<control-output control="FLAP0" prop="/surface-positions/rudder-pos-norm"/>
</vstab>
<vstab x="-8.231" y="-2.684" z="0.567"
chord="2.385"
length="1.410"
sweep="30"
taper="0.45">
<stall aoa="16" width="5" peak="1.5"/>
<flap0 start="0" end="0.9" lift="1.8" drag="1.3"/>
<control-input axis="/controls/flight/rudder" control="FLAP0" invert="true"/>
<control-input axis="/controls/flight/rudder-trim" control="FLAP0" invert="true"/>
<control-output control="FLAP0" prop="/surface-positions/rudder-pos-norm"/>
</vstab>
<hstab x="-8.1" y="2.684" z="0.8"
chord="1.2"
length="1.95"
sweep="5"
taper="0.4">
<stall aoa="12" width="3" peak="1.3"/>
<flap0 start="0" end="1" lift="1.6" drag="1.5"/>
<flap1 start="0" end="1" lift="1.6" drag="1.5"/>
<control-input axis="/controls/flight/elevator" square="false" control="FLAP0" />
<control-input axis="/controls/flight/elevator-trim" control="FLAP0"/>
<control-output control="FLAP0" prop="/surface-positions/elevator-pos-norm"/>
</hstab>
<!--
N2O/HTPB SpaceDev Hybrid rocket motor
Power : 16535 lbs
Weight : 396 lb
-->
<jet x="-4.2" y="0" z="0.18"
mass="396"
thrust="16535" >
<actionpt x="-7.5" y="0" z="0.18"/>
<control-input axis="/controls/engines/engine[0]/throttle" control="THROTTLE"/>
</jet>
<!-- Left 1 -->
<gear x="-5.50" y="1.384" z="-1.051"
compression="0.30"
spring="1"
damp="2">
<control-input axis="/controls/gear/brake-left" control="BRAKE"/>
<control-input axis="/controls/gear/brake-parking" control="BRAKE"/>
<control-input axis="/controls/flight/rudder" control="STEER" src0="-1.0" src1="1.0" dst0="-0.5" dst1="0.5"/>
</gear>
<!-- Right 1 -->
<gear x="-5.50" y="-1.384" z="-1.051"
compression="0.30"
spring="1"
damp="2">
<control-input axis="/controls/gear/brake-right" control="BRAKE"/>
<control-input axis="/controls/gear/brake-parking" control="BRAKE"/>
<control-input axis="/controls/flight/rudder" control="STEER" src0="-1.0" src1="1.0" dst0="-0.5" dst1="0.5"/>
</gear>
<!-- Front -->
<gear x="-1.535" y="0" z="-1.043"
retract-time="7"
compression="0.30"
spring="1"
damp="2">
<control-input axis="/controls/gear/brake-right" control="BRAKE"/>
<control-input axis="/controls/gear/brake-parking" control="BRAKE"/>
<control-input axis="/controls/gear/gear-down" control="EXTEND"/>
<control-output control="EXTEND" prop="/gear/gear[2]/position-norm"/>
<control-speed control="EXTEND" transition-time="7"/>
</gear>
<!-- Internal tanks 2 * 3200 lb liter wings -->
<tank x="-4.40" y="-1.8" z="0.60" jet="true" capacity="750"/>
<tank x="-4.40" y="1.8" z="0.60" jet="true" capacity="750"/>
<ballast x="-2.0" y="0.0" z="0" mass="300"/>
</airplane>