Hello,
I created that topic to avoid putting too much pictures in dev topic about pfd.
A sum up of my last week work about slight pfd adjustments.
Datas come from Dps Dictionnary 6-18 and SCOM 2-7
Available soon on the dev branch
https://sourceforge.net/u/gingin/fgspaceshuttledev/ci/development/tree/
The more I dig in the code, the more I am fascined by the work made behind the screen.
A huge sandbox where we can just reorganise elements for a better fidelity, but everything is already there.
Let's start with MM 101
ADI is driven by nav software 4 mn before launch
SRB ignition , MM 102
SRB sep, MM 103
Beta and Vrel pointer vanished above 200 kfeet
In case of TAL declared, MM 103 T
Now, distance to TAL runway and bearing is displayed , some infos are removed
ET sep, MM 104
Some new layout
PFD MM105 through 303 is normally just displaying the ADI ball
But I kept some relevants informations for On orbit better management ( rendez vous etc)
Orbit Pfd ( only available in OPS 2 and OPS 3 until mm304)
Entry mode now, mm 304 or mm 602
New layout for Pitch and Roll/yaw Auto or CSS and speebrake shown now below MM on the right ( to come a yellow rectangle when switched to Man or CSS above mach 1)
Also HAC bearing and runway distance only displayed, with vertical acceleration
TAEM interface ( mm 305 or 603)
Hac H pointer for WP1 entry HAC and C for HAC center
Both distance to runway and to hac center displayed
Glideslope only and no vert accel anymore
Entering the HAC
DAz is replaced byt HTA ( Hac turn angle) . It displays remaining degrees in HAC before runway alignement
Once in final in Approach mode ( A/L), the only things remaining are Runway Bearing and distance to runway
Below Mach 0.9, Speed tape switches to EAS ( with still mach ladder behind) and Speed box switches to Mach
Yellow Altimeter tape below 2000 feet ( either AGL or Baro depending if Radar altimeters are available or not)
If RTLS declared, MM 601
Vrel pointer and Beta display appeared again
Pre PPA Inertial Speed is displayed
Post PPA Relative Speed is displayed and Bearing to runway with Earth relative tail pointer
MM 601 Pre PPA
MM 601 Post PPA