I found that for the fault typo:
So in orbit , Fault From Sm will be notified through gpc 4
Ascent and entry, it will be via gpc 5 bfs
Even if gpc 1 is connected to pl1/2 in case of bfs failure , bfs is the primary mean for sm during ops 1/3, so I think it is like you coded it.
Sm fault only shown and erasable from bfs keyboard
Fault within common set
Concerning BFS listening
I thought DK listen would be about fault reset or stuff like that, but it concerned some actions on some Pass mm that will be automatically done also into the same bfs mm
Other minor subject , I remember we talked once about the time displayed during ops 1.
It is well the MET by default and not GMT
@Gomendio: For the non normal syllabus thing, I didn’t find so far any detailed docs about sim sessions.
But in 3 or 4 years of sim session, I guess they went through to all the major failure we can find in the pocket checklist
https://www.nasa.gov/centers/johnson/pdf/366508main_APCL_G_O_1.pdfThat is a good basis to work on failure .
For example, the mains bus or fuel cell shortage
Very similar way to handle the multi conditional path like in a qrh
And before going through that, you will need to know quite well the associated scom chapter ( like fcom 2 knowledge before going through qrh)