Airbus A330 problem

[owenexplorerph]

I am using a clean installation of FGFS 2020.1.2 preview.

1. IDG-A33x-master but the aircraft would not load and an error appears like this.

Fatal Exception
FGProperty/Value::GetValue()
The property /Instrumentation/airspeed-indicator/indicated-speed-kt does not exist.

2. Meanwhile, the A330-200 series would load up but no virtual cockpit and a blank airplane model.

Help me since I am not knowledgable in programming and just basic flying.

PC Specs:
Windows 10 19041.450
Intel Core i3-8130u
Nvidia GeForce MX130
Transcend TS120 SSD
4 GB DDR4 RAM

[Johan G]

Welcome to the forum owenexplorerph!

1. [...] IDG-A33x-master [...]

2. [...] the A330-200 series would load up but no virtual cockpit and a blank airplane model.

A very common and easily done mistake is to not remove the "-master" suffix that GitHub add to the aircraft's folder. It will likely at least fix the first problem.

The second problem I am unsure of.

Edit: This apparently is not the wiki, but the forum.

[owenexplorerph]

I did follow the steps correctly but the error is more on the coding of the IDG A33x.

[D-ECHO]

Hi there!

It's probably best to use JMaverick's version:
https://github.com/JMaverick16/Airbus_A330

Make sure to read and follow this: https://github.com/JMaverick16/Airbus_A ... INSTALL.md

Best regards

[owenexplorerph]

Hi there!

It's probably best to use JMaverick's version:
https://github.com/JMaverick16/Airbus_A330

Make sure to read and follow this: https://github.com/JMaverick16/Airbus_A ... INSTALL.md

Best regards

Thanks for the advice! Currently downloading it and verifying it works.

Version updated to 2020.4 nightly.