Board index FlightGear Support Tools ATC-pie

Airports for GND in SOLO mode  Topic is solved

ATC-pie is a radar air traffic control simulation program for the FlightGear multi-player network.

Airports for GND in SOLO mode

Postby jmwilton » Tue Feb 06, 2018 6:19 pm

I have been trying to find airports that have the required data to work in SOLO and enable the GND option.

Can someone point me to specific airport files and their download location that should work in this mode?
US would be great but anywhere in the world is fine.

Thanks.
jmwilton
 
Posts: 3
Joined: Thu Feb 01, 2018 1:12 am

Re: Airports for GND in SOLO mode  

Postby Progman » Tue Feb 06, 2018 8:25 pm

KSFO and KATL have the option to play GND in solo play.
Progman
 
Posts: 11
Joined: Sun Dec 17, 2017 7:12 pm

Re: Airports for GND in SOLO mode

Postby mickybadia » Tue Feb 06, 2018 9:47 pm

Technically, what you need is a "ground network" and "parking positions" in the .dat file for your airport (and to set up the solo system and the runways with acceptable ACFT types for the location & scenario).

If you are skilled with grep, etc. you can easily look for lines starting with 1200, 1201 or 1202 for GND net's in the data, and with 1300 for PKG pos's. In any case note that these abstract (non-scenic) features in the default data are very poorly covered. Even those you will find will contain many errors, messed up geometry or names, and many missing TWYs. Not to mention that PKG may then be missing, or contain only a couple of correctly specified positions.

Instead, I suggest you look for newer stuff on the gateway, and see resources/apt/Notice and the FAQ to use your downloaded file. I know of this filtering interface which can help, esp. the "GND network" filter: x-plane.cleverest.eu
I assume it is querying the latest online data available.

If no luck with any desired airports, open up WED and plot the TWYs and share ;-)
mickybadia
 
Posts: 397
Joined: Tue Sep 24, 2013 9:12 am

Re: Airports for GND in SOLO mode

Postby jmwilton » Wed Feb 07, 2018 2:57 pm

Thanks for the two replies.
KSFO and KATL will be enough to get me going.
Not ready to take on WED, yet.
jmwilton
 
Posts: 3
Joined: Thu Feb 01, 2018 1:12 am


Return to ATC-pie

Who is online

Users browsing this forum: No registered users and 1 guest