Board index FlightGear Development Scenery

Lyon Saint Exupery Scenery Project

Questions and discussion about enhancing and populating the FlightGear world.

Re: Lyon Saint Exupery Scenery Project

Postby daweed » Sun Sep 20, 2015 10:44 am

@Josh
Thanks for the informations.

You are welcome. Tower is open each week end from 19h UTC to 22 UTC

Check the Flightgear ATC Event
http://flightgear-atc.alwaysdata.net/, i use to set my session here :)
Linux Mint 18.3
AMD FX 4300 Quad-Core Black Edition|20 Go RAMGeForce GTX 750 Ti
FG Interface
Lyon Saint Exupery Scenery
daweed
 
Posts: 264
Joined: Thu Dec 11, 2014 10:45 am
Location: LFKP LFLL
Callsign: daweed
OS: Windows 10 Familly

Re: Lyon Saint Exupery Scenery Project

Postby daweed » Mon Sep 21, 2015 7:04 pm

Hello,

First part have been submit with success, now i ll wait and hope that none will be rejected.

If all submit models are accepted, u will see all what u can see on the last pics, except the AF Terminal (black terminal in foreground which is not finish)

See u soon with good news i hope :)
Linux Mint 18.3
AMD FX 4300 Quad-Core Black Edition|20 Go RAMGeForce GTX 750 Ti
FG Interface
Lyon Saint Exupery Scenery
daweed
 
Posts: 264
Joined: Thu Dec 11, 2014 10:45 am
Location: LFKP LFLL
Callsign: daweed
OS: Windows 10 Familly

Re: Lyon Saint Exupery Scenery Project

Postby daweed » Mon Sep 21, 2015 7:51 pm

Well, it goes faster than i thought.
All technical building have been accepted .... but the tower building have been rejected ... too more textures file.

I have to make less textures files, but need to make them bigger (actually 1024x1024)

This will take to me some days, but , i think i ll be able to submit remap model for the end of week ...

Daweed
Linux Mint 18.3
AMD FX 4300 Quad-Core Black Edition|20 Go RAMGeForce GTX 750 Ti
FG Interface
Lyon Saint Exupery Scenery
daweed
 
Posts: 264
Joined: Thu Dec 11, 2014 10:45 am
Location: LFKP LFLL
Callsign: daweed
OS: Windows 10 Familly

Re: Lyon Saint Exupery Scenery Project

Postby daweed » Wed Sep 23, 2015 7:57 am

It took me a few hours to refactor my textures.

The model was accepted and validated in TS and should be available here by the end of the day (12:30Z today in the mail)

Thanks to Vic for his help

I will now continue my work on terminal.
Linux Mint 18.3
AMD FX 4300 Quad-Core Black Edition|20 Go RAMGeForce GTX 750 Ti
FG Interface
Lyon Saint Exupery Scenery
daweed
 
Posts: 264
Joined: Thu Dec 11, 2014 10:45 am
Location: LFKP LFLL
Callsign: daweed
OS: Windows 10 Familly

Re: Lyon Saint Exupery Scenery Project

Postby Catalanoic » Wed Sep 23, 2015 10:45 am

Yuhuu!! Thankyou!
User avatar
Catalanoic
 
Posts: 1014
Joined: Mon Mar 05, 2012 12:33 am
Location: Barcelona (LEBL)
Callsign: Catalanoic
Version: 2017.3
OS: Lubuntu/Windows 7

Re: Lyon Saint Exupery Scenery Project

Postby daweed » Wed Sep 23, 2015 11:01 am

U are welcome, please if u come to LFLL , take a screenshot of what u saw and tell me if something is wrong.
Linux Mint 18.3
AMD FX 4300 Quad-Core Black Edition|20 Go RAMGeForce GTX 750 Ti
FG Interface
Lyon Saint Exupery Scenery
daweed
 
Posts: 264
Joined: Thu Dec 11, 2014 10:45 am
Location: LFKP LFLL
Callsign: daweed
OS: Windows 10 Familly

Re: Lyon Saint Exupery Scenery Project

Postby Catalanoic » Wed Sep 23, 2015 1:02 pm

daweed wrote in Wed Sep 23, 2015 11:01 am:U are welcome, please if u come to LFLL , take a screenshot of what u saw and tell me if something is wrong.

Looks the same for me. Additionaly you can do night textures too (i think it's important for a tower). Look at the wiki or other models as an example. Great work!
Image
User avatar
Catalanoic
 
Posts: 1014
Joined: Mon Mar 05, 2012 12:33 am
Location: Barcelona (LEBL)
Callsign: Catalanoic
Version: 2017.3
OS: Lubuntu/Windows 7

Re: Lyon Saint Exupery Scenery Project

Postby daweed » Tue Sep 29, 2015 6:29 am

Hello

Since Vic help me to made all building suitable, i have rebuild the AF Hub terminal from scratch
Less vertex, less faces

About 1 Mo for the terminal

Image

Image

Image

Now going to UV Map ... :)
Linux Mint 18.3
AMD FX 4300 Quad-Core Black Edition|20 Go RAMGeForce GTX 750 Ti
FG Interface
Lyon Saint Exupery Scenery
daweed
 
Posts: 264
Joined: Thu Dec 11, 2014 10:45 am
Location: LFKP LFLL
Callsign: daweed
OS: Windows 10 Familly

Re: Lyon Saint Exupery Scenery Project

Postby daweed » Wed Oct 14, 2015 7:35 pm

Hello,

Terminal have been submitted on TerraSync
Terminal is now available on TS :)

http://scenemodels.flightgear.org/app.p ... id=3402140
http://scenemodels.flightgear.org/app.p ... id=3402141

Image

Image

Image
Linux Mint 18.3
AMD FX 4300 Quad-Core Black Edition|20 Go RAMGeForce GTX 750 Ti
FG Interface
Lyon Saint Exupery Scenery
daweed
 
Posts: 264
Joined: Thu Dec 11, 2014 10:45 am
Location: LFKP LFLL
Callsign: daweed
OS: Windows 10 Familly

Re: Lyon Saint Exupery Scenery Project

Postby daweed » Tue Oct 20, 2015 10:07 pm

Hello,

Little update on scenery.

I added (not actually on TS but soon) a new building.

Image

With some update on the AC Blender plugins buildings are now display by night, so i decide to have a try on day / night textures

This have been done on the new building (small and easy) and here some pictures

day :

Image

night :

Image

I am going to work and update old building textures before continuing modelling the airport

Daweed
Linux Mint 18.3
AMD FX 4300 Quad-Core Black Edition|20 Go RAMGeForce GTX 750 Ti
FG Interface
Lyon Saint Exupery Scenery
daweed
 
Posts: 264
Joined: Thu Dec 11, 2014 10:45 am
Location: LFKP LFLL
Callsign: daweed
OS: Windows 10 Familly

Re: Lyon Saint Exupery Scenery Project

Postby biloute974 » Wed Oct 21, 2015 8:23 am

Hi,

really nice Daweed ;)
Intel I7 7700 - 16Gb DDR4 - Nvidia GTX970 - FG 2017.4.0 from D&C
biloute974
 
Posts: 180
Joined: Mon Feb 23, 2015 8:49 am
Callsign: U974
Version: 2016.1.0
OS: Mint 17.2

Re: Lyon Saint Exupery Scenery Project

Postby daweed » Sun Oct 25, 2015 10:08 am

RELEASE ALPHA

Download Link on to the First Post
Linux Mint 18.3
AMD FX 4300 Quad-Core Black Edition|20 Go RAMGeForce GTX 750 Ti
FG Interface
Lyon Saint Exupery Scenery
daweed
 
Posts: 264
Joined: Thu Dec 11, 2014 10:45 am
Location: LFKP LFLL
Callsign: daweed
OS: Windows 10 Familly

Re: Lyon Saint Exupery Scenery Project

Postby josh » Sun Oct 25, 2015 9:09 pm

Hej daweed,

thanks for your nice scenery and buildings. I also likes the area.
I have very few proposals and indications :-)
About the building which have only one texture for night and day like LFLL-BAT-AF-TERM.ac,
I think a emission about emis 0.45 0.45 0.45 is enough. emis 1.0 1.0 1.0 is very hard at night (and day).
For building with night and day texture you can try this:
LFLL-TERM02-PART01.ac
    Line 3 - emis 0.1 0.1 0.1
LFLL-TERM02-PART01.xml
    after Line 25 additional to <type>textranslate</type>
    Code: Select all
       <animation>
        <type>material</type>
        <object-name>LFLL-TERM02-PART01</object-name>
          <condition>      
             <greater-than>      
             <property>/sim/time/sun-angle-rad</property>
             <value>1.57</value>
             </greater-than>
          </condition>
          <emission>   
             <red>0.6</red>   
             <green>0.6</green>   
             <blue>0.6</blue>
          </emission>
       </animation>

Your LFLL.procedures.xml is written for Runways="18,36".
You have to name the runways exactly - Runways="18L,18R,36L,36R".
The STAR MOU 1 (your MOU 5N) can be used for all 4 runways at LFLL.

Very nice contribution. Way to go!
greets and see you in Lyon!
Josh
User avatar
josh
 
Posts: 112
Joined: Thu Sep 20, 2012 5:49 pm
Location: Dresden Saxony

Re: Lyon Saint Exupery Scenery Project

Postby daweed » Mon Oct 26, 2015 6:09 am

Hi Josh,

Thks for the feed back, i ll have a look for the emitted light, and will correct LFLL.procedures
Linux Mint 18.3
AMD FX 4300 Quad-Core Black Edition|20 Go RAMGeForce GTX 750 Ti
FG Interface
Lyon Saint Exupery Scenery
daweed
 
Posts: 264
Joined: Thu Dec 11, 2014 10:45 am
Location: LFKP LFLL
Callsign: daweed
OS: Windows 10 Familly

Re: Lyon Saint Exupery Scenery Project

Postby dagl » Fri Nov 06, 2015 5:15 pm

Hello, because I (if I'll have the time) would like to fly from LFLL to LSGG during the Festival of Flightgear 2015, I decided to add the SIDs via BELUS to LFLL's route manager file. The SIDs are defined by VORs and DMEs and I only know how to specify explicit coordinates in route manager files, so I had to determine those coordinates. I also added "dummy" waypoints named "ICPT R-175-LSE" etc. and marked them with "<Flytype>Fly-by</Flytype>" to create legs that approximately match the desired radials of the VORs. To determine the coordinates of the Sid_waypoints I used the functions SGGeodesy::direct, SGGeodesy::radialIntersection and SGGeodesy::distanceNm of SimGear 3.0.0. I got the coordinates of Sid_waypoints "RW 18L", "RW 18R", "RW 36L", "RW 36R" from the French AIP and the coordinates of the VORs from FlightGear's nav.dat file (810 Version - data cycle 2013.10, build 20131334). For the magnetic variation of the VORs I used the corresponding value of the "multiuse" variable specified in the nav.dat file, otherwise I used the magnetic variation returned by SimGear's function sgGetMagVar for the position of the previous waypoint. It should be noted that the sgGetMagVar function returns a magnetic variation of approx. 1.06° for the ARP of LFLL, but according to the French AIP the magnetic variation at LFLL is 0°.

The file certainly does not include complete information for the SIDs and can only be used together with the charts. In addition to the problems noted before I was unable to test the file with the autopilots of bigger aircrafts, unfortunately, but I thought that it might make flying from LFLL to LSGG a little more convenient to others, so I decided to share it with you.

Code: Select all
<!-- [...] -->
<ProceduresDB>
    <Airport ICAOcode="LFLL">
      <!-- [...] -->
      <Sid Name="BELUS 8S for RW 18R" Runways="18R">
         <Sid_Waypoint ID="1">
            <Name>RW 18R</Name>
            <Type>Normal</Type>
            <Latitude>45.7465888888889</Latitude>
            <Longitude>5.08593888888889</Longitude>
         </Sid_Waypoint>
         <Sid_Waypoint ID="2">
            <Name>175*-4.2-DME-LSE</Name>
            <Type>Normal</Type>
            <Latitude>45.6755632067865</Latitude>
            <Longitude>5.09291327884423</Longitude>
         </Sid_Waypoint>
         <Sid_Waypoint ID="3">
            <Name>ICPT R-175-LSE</Name>
            <Type>Normal</Type>
            <Latitude>45.6759270668899</Latitude>
            <Longitude>5.1010183644792</Longitude>
            <Flytype>Fly-by</Flytype>
         </Sid_Waypoint>
         <Sid_Waypoint ID="4">
            <Name>R-175-LSE-9-DME-LSE</Name>
            <Type>Normal</Type>
            <Latitude>45.5963809363995</Latitude>
            <Longitude>5.11291285992742</Longitude>
         </Sid_Waypoint>
         <Sid_Waypoint ID="5">
            <Name>ICPT R-294-LTP</Name>
            <Type>Normal</Type>
            <Latitude>45.5852264259681</Latitude>
            <Longitude>5.11457832678843</Longitude>
            <Flytype>Fly-by</Flytype>
         </Sid_Waypoint>
         <Sid_Waypoint ID="6">
            <Name>R-294-LTP-3.5-DME-LTP</Name>
            <Type>Normal</Type>
            <Latitude>45.5117347148522</Latitude>
            <Longitude>5.3626985167493</Longitude>
         </Sid_Waypoint>
         <Sid_Waypoint ID="7">
            <Name>ICPT R-030-LTP</Name>
            <Type>Normal</Type>
            <Latitude>45.488972</Latitude>
            <Longitude>5.439056</Longitude>
            <Flytype>Fly-by</Flytype>
         </Sid_Waypoint>
         <Sid_Waypoint ID="8">
            <Name>R-030-LTP-12.9-DME-LTP</Name>
            <Type>Normal</Type>
            <Latitude>45.6768795242068</Latitude>
            <Longitude>5.58771515239252</Longitude>
         </Sid_Waypoint>
         <Sid_Waypoint ID="9">
            <Name>BELUS</Name>
            <Type>Normal</Type>
            <Latitude>45.675278</Latitude>
            <Longitude>5.593889</Longitude>
         </Sid_Waypoint>
      </Sid>
      <Sid Name="BELUS 8S for RW 18L" Runways="18L">
         <Sid_Waypoint ID="1">
            <Name>RW 18L</Name>
            <Type>Normal</Type>
            <Latitude>45.7349416666667</Latitude>
            <Longitude>5.09186944444444</Longitude>
         </Sid_Waypoint>
         <Sid_Waypoint ID="2">
            <Name>175*-4.2-DME-LSE</Name>
            <Type>Normal</Type>
            <Latitude>45.6757210970384</Latitude>
            <Longitude>5.09768185273924</Longitude>
         </Sid_Waypoint>
         <Sid_Waypoint ID="3">
            <Name>ICPT R-175-LSE</Name>
            <Type>Normal</Type>
            <Latitude>45.6759270668899</Latitude>
            <Longitude>5.1010183644792</Longitude>
            <Flytype>Fly-by</Flytype>
         </Sid_Waypoint>
         <Sid_Waypoint ID="4">
            <Name>R-175-LSE-9-DME-LSE</Name>
            <Type>Normal</Type>
            <Latitude>45.5963809363995</Latitude>
            <Longitude>5.11291285992742</Longitude>
         </Sid_Waypoint>
         <Sid_Waypoint ID="5">
            <Name>ICPT R-294-LTP</Name>
            <Type>Normal</Type>
            <Latitude>45.5852264259681</Latitude>
            <Longitude>5.11457832678843</Longitude>
            <Flytype>Fly-by</Flytype>
         </Sid_Waypoint>
         <Sid_Waypoint ID="6">
            <Name>R-294-LTP-3.5-DME-LTP</Name>
            <Type>Normal</Type>
            <Latitude>45.5117347148522</Latitude>
            <Longitude>5.3626985167493</Longitude>
         </Sid_Waypoint>
         <Sid_Waypoint ID="7">
            <Name>ICPT R-030-LTP</Name>
            <Type>Normal</Type>
            <Latitude>45.488972</Latitude>
            <Longitude>5.439056</Longitude>
            <Flytype>Fly-by</Flytype>
         </Sid_Waypoint>
         <Sid_Waypoint ID="8">
            <Name>R-030-LTP-12.9-DME-LTP</Name>
            <Type>Normal</Type>
            <Latitude>45.6768795242068</Latitude>
            <Longitude>5.58771515239252</Longitude>
         </Sid_Waypoint>
         <Sid_Waypoint ID="9">
            <Name>BELUS</Name>
            <Type>Normal</Type>
            <Latitude>45.675278</Latitude>
            <Longitude>5.593889</Longitude>
         </Sid_Waypoint>
      </Sid>
      <Sid Name="BELUS 8N for RW 36L" Runways="36L">
         <Sid_Waypoint ID="1">
            <Name>RW 36L</Name>
            <Type>Normal</Type>
            <Latitude>45.7107472222222</Latitude>
            <Longitude>5.09030000000000</Longitude>
         </Sid_Waypoint>
         <Sid_Waypoint ID="2">
            <Name>355*-3.4-DME-LSE</Name>
            <Type>Normal</Type>
            <Latitude>45.8018107193253</Latitude>
            <Longitude>5.08134257977082</Longitude>
         </Sid_Waypoint>
         <Sid_Waypoint ID="3">
            <Name>ICPT R-352-LSE</Name>
            <Type>Normal</Type>
            <Latitude>45.8014827612849</Latitude>
            <Longitude>5.07791206901834</Longitude>
            <Fly-type>Fly-by</Fly-type>
         </Sid_Waypoint>
         <Sid_Waypoint ID="4">
            <Name>R-352-LSE-4.2-DME-LSE</Name>
            <Type>Normal</Type>
            <Latitude>45.8146483030675</Latitude>
            <Longitude>5.0749269868742</Longitude>
         </Sid_Waypoint>
         <Sid_Waypoint ID="5">
            <Name>ICPT R-328-LTP</Name>
            <Type>Normal</Type>
            <Latitude>45.8356085702557</Latitude>
            <Longitude>5.11660175030125</Longitude>
            <Flytype>Fly-by</Flytype>
         </Sid_Waypoint>
         <Sid_Waypoint ID="6">
            <Name>R-328-LTP-9.8-DME-LSE</Name>
            <Type>Normal</Type>
            <Latitude>45.6553607116372</Latitude>
            <Longitude>5.28487987603318</Longitude>
         </Sid_Waypoint>
         <Sid_Waypoint ID="7">
            <Name>ICPT R-076-VNE</Name>
            <Type>Normal</Type>
            <Latitude>45.6300055888887</Latitude>
            <Longitude>5.308446220307</Longitude>
            <Flytype>Fly-by</Flytype>
         </Sid_Waypoint>
         <Sid_Waypoint ID="8">
            <Name>R-076-VNE-R-030-LTP</Name>
            <Type>Normal</Type>
            <Latitude>45.6774555089266</Latitude>
            <Longitude>5.58817176486233</Longitude>
         </Sid_Waypoint>
         <Sid_Waypoint ID="9">
            <Name>BELUS</Name>
            <Type>Normal</Type>
            <Latitude>45.675278</Latitude>
            <Longitude>5.593889</Longitude>
         </Sid_Waypoint>
      </Sid>
      <Sid Name="BELUS 8N for RW 36R" Runways="36R">
         <Sid_Waypoint ID="1">
            <Name>RW 36R</Name>
            <Type>Normal</Type>
            <Latitude>45.7110055555556</Latitude>
            <Longitude>5.09478055555556</Longitude>
         </Sid_Waypoint>
         <Sid_Waypoint ID="2">
            <Name>355*-3.4-DME-LSE</Name>
            <Type>Normal</Type>
            <Latitude>45.8020830024514</Latitude>
            <Longitude>5.08582439574879</Longitude>
         </Sid_Waypoint>
         <Sid_Waypoint ID="3">
            <Name>ICPT R-352-LSE</Name>
            <Type>Normal</Type>
            <Latitude>45.8016290562115</Latitude>
            <Longitude>5.07931018125429</Longitude>
            <Flytype>Fly-by</Flytype>
         </Sid_Waypoint>
         <Sid_Waypoint ID="4">
            <Name>R-352-LSE-4.2-DME-LSE</Name>
            <Type>Normal</Type>
            <Latitude>45.8146483030675</Latitude>
            <Longitude>5.0749269868742</Longitude>
         </Sid_Waypoint>
         <Sid_Waypoint ID="5">
            <Name>ICPT R-328-LTP</Name>
            <Type>Normal</Type>
            <Latitude>45.8356085702557</Latitude>
            <Longitude>5.11660175030125</Longitude>
            <Flytype>Fly-by</Flytype>
         </Sid_Waypoint>
         <Sid_Waypoint ID="6">
            <Name>R-328-LTP-9.8-DME-LSE</Name>
            <Type>Normal</Type>
            <Latitude>45.6553607116372</Latitude>
            <Longitude>5.28487987603318</Longitude>
         </Sid_Waypoint>
         <Sid_Waypoint ID="7">
            <Name>ICPT R-076-VNE</Name>
            <Type>Normal</Type>
            <Latitude>45.6300055888887</Latitude>
            <Longitude>5.308446220307</Longitude>
            <Flytype>Fly-by</Flytype>
         </Sid_Waypoint>
         <Sid_Waypoint ID="8">
            <Name>R-076-VNE-R-030-LTP</Name>
            <Type>Normal</Type>
            <Latitude>45.6774555089266</Latitude>
            <Longitude>5.58817176486233</Longitude>
         </Sid_Waypoint>
         <Sid_Waypoint ID="9">
            <Name>BELUS</Name>
            <Type>Normal</Type>
            <Latitude>45.675278</Latitude>
            <Longitude>5.593889</Longitude>
         </Sid_Waypoint>
      </Sid>
   </Airport>
</ProceduresDB>


Kind regards,
dagl
dagl
 
Posts: 1
Joined: Fri Nov 06, 2015 3:10 pm

PreviousNext

Return to Scenery

Who is online

Users browsing this forum: No registered users and 8 guests