Board index FlightGear Development Aircraft

Airbus_A330 development (based on IDG-A33X)

Questions and discussion about creating aircraft. Flight dynamics, 3d models, cockpits, systems, animation, textures.

Re: Airbus_A330 development (based on IDG-A33X)

Postby naplesAPF » Fri Jul 17, 2020 12:42 am

I enter the route into the route manager & activate it. But after I take off and turn on the AP, the a330 fails to follow the route I set up.
naplesAPF
 
Posts: 58
Joined: Sun Jan 04, 2015 8:17 pm

Re: Airbus_A330 development (based on IDG-A33X)

Postby FirstOfficerDelta » Fri Jul 17, 2020 1:46 am

You clicked the LNAV right?

P.S. There is a guide on flying the A330 in the repository.
FirstOfficerDelta
 
Posts: 50
Joined: Thu Mar 26, 2020 12:59 am
Callsign: CPA830

Re: Airbus_A330 development (based on IDG-A33X)

Postby merspieler » Fri Jul 17, 2020 6:40 am

Well... for me, the routmanager works.
If everything is going against you, keep in mind that airplanes take off against the wind, not with it.
merspieler
 
Posts: 771
Joined: Thu Oct 26, 2017 10:43 am
Location: Wish to be in YBCS
Callsign: JST935. ORI1711
IRC name: merspieler
Version: next
OS: Debian Bullseye

Re: Airbus_A330 development (based on IDG-A33X)

Postby naplesAPF » Sat Jul 18, 2020 2:00 pm

after a little experimenting, think maybe the the problem is with FG2020.1.1 on Mac. maybe
naplesAPF
 
Posts: 58
Joined: Sun Jan 04, 2015 8:17 pm

Re: Airbus_A330 development (based on IDG-A33X)

Postby merspieler » Sun Jul 19, 2020 9:51 am

have you tried other aircraft?

if they show the same issue, it's fg, else it's the a330
If everything is going against you, keep in mind that airplanes take off against the wind, not with it.
merspieler
 
Posts: 771
Joined: Thu Oct 26, 2017 10:43 am
Location: Wish to be in YBCS
Callsign: JST935. ORI1711
IRC name: merspieler
Version: next
OS: Debian Bullseye

Re: Airbus_A330 development (based on IDG-A33X)

Postby naplesAPF » Tue Jul 21, 2020 2:40 pm

Yes I tried several other aircraft and the route manager worked on these. So I now guess the route manager not working problem is with the Airbus_a330 version.
naplesAPF
 
Posts: 58
Joined: Sun Jan 04, 2015 8:17 pm

Re: Airbus_A330 development (based on IDG-A33X)

Postby daweed » Wed Jul 22, 2020 6:49 am

Hello, using Airbus_A330 last release with FG 2020.2.1

FROM / TO feeded
RTE Manager feeded (manually or by file)

Take off
AP1
Knob heading push

No problem here
All is ok here
Linux Mint 20
AMD Ryzen 7 3700X |32 Go RAM GeForce RTX 2080 8 Go
FG Interface
Lyon Saint Exupery Scenery

ATC on LFLL on Friday 19:00 UTC => 22:00 UTC
daweed
 
Posts: 379
Joined: Thu Dec 11, 2014 10:45 am
Location: LFKP LFLL
Callsign: daweed
OS: Linux Mint 20

Re: Airbus_A330 development (based on IDG-A33X)

Postby michsun » Sat Sep 05, 2020 1:50 pm

Is gear tire smoke working on this plane?
michsun
 
Posts: 11
Joined: Thu Jan 30, 2014 3:07 pm

Re: Airbus_A330 development (based on IDG-A33X)

Postby Mohamed » Sat Oct 10, 2020 9:18 am

i think yes i searched in the aircraft files and i found a picture and some files named tyre-smoke
:D
Mohamed
 
Posts: 33
Joined: Tue Aug 25, 2020 4:04 pm
Location: Casablanca, Morocco
Version: 2020.3.2

Re: Airbus_A330 development (based on IDG-A33X)

Postby Mohamed » Fri Nov 13, 2020 11:16 am

Can you add reflexion ( to be like the 777 and a320)

i could help if you want just give me the right wiki article

thanks
Mohamed
 
Posts: 33
Joined: Tue Aug 25, 2020 4:04 pm
Location: Casablanca, Morocco
Version: 2020.3.2

Re: Airbus_A330 development (based on IDG-A33X)

Postby merspieler » Sat Nov 14, 2020 8:47 pm

If everything is going against you, keep in mind that airplanes take off against the wind, not with it.
merspieler
 
Posts: 771
Joined: Thu Oct 26, 2017 10:43 am
Location: Wish to be in YBCS
Callsign: JST935. ORI1711
IRC name: merspieler
Version: next
OS: Debian Bullseye

Re: Airbus_A330 development (based on IDG-A33X)

Postby Mohamed » Sun Nov 15, 2020 10:21 pm

ok thanks
Mohamed
 
Posts: 33
Joined: Tue Aug 25, 2020 4:04 pm
Location: Casablanca, Morocco
Version: 2020.3.2

Re: Airbus_A330 development (based on IDG-A33X)

Postby Delta5142 » Wed Nov 18, 2020 3:04 am

Hi all,
I'm sorry if this topic has been previously mentioned on this thread. in the A330 cockpit, I have noticed a sort of side panel with switches to the left hand side of the PFD and the ND.
https://d1a2ot8agkqe8w.cloudfront.net/w ... _61546.jpg
I have realized that this is not in the cockpit of this A330 in flightgear. Is there a way to implement this?
Why do A330s ALWAYS have buttery landings?
https://www.youtube.com/watch?v=lowrM-780tg
Delta5142
 
Posts: 48
Joined: Thu Jul 02, 2020 3:18 pm
Location: California
Callsign: DAL5142
Version: 2020.1.3
OS: Mac OS X

Re: Airbus_A330 development (based on IDG-A33X)

Postby merspieler » Wed Nov 18, 2020 9:23 am

If you take a closer look, you'll realize, that the Main Instrument Panel and the Pedestal are from the A320.... there's a lot more "wrong" with the cockpit.

If you'd like to implement this, you would have to start by modeling those panels.
If everything is going against you, keep in mind that airplanes take off against the wind, not with it.
merspieler
 
Posts: 771
Joined: Thu Oct 26, 2017 10:43 am
Location: Wish to be in YBCS
Callsign: JST935. ORI1711
IRC name: merspieler
Version: next
OS: Debian Bullseye

Re: Airbus_A330 development (based on IDG-A33X)

Postby Mohamed » Thu Nov 19, 2020 8:19 am

i've reported that on the GIT repo but JMAV said that there was different cockpit for every version and closed the issue

But the a330-200/300 have the same cockpit right ?
Mohamed
 
Posts: 33
Joined: Tue Aug 25, 2020 4:04 pm
Location: Casablanca, Morocco
Version: 2020.3.2

PreviousNext

Return to Aircraft

Who is online

Users browsing this forum: No registered users and 3 guests