Board index FlightGear Development Aircraft

Original Cessna 172p improvement

Questions and discussion about creating aircraft. Flight dynamics, 3d models, cockpits, systems, animation, textures.

Original Cessna 172p improvement

Postby openflight » Thu Jul 25, 2019 10:26 am

I am aware that I am starting another 'improvement' topic, but this one seems to be actually going somewhere.

As you may know, my Flight Gear One project involves using the Flight Gear version 1.0 environment for simulator flying and development of aircraft and scenery. Much work has been done, but nothing published as a full aircraft. This time I hope to change all that.

Flight Gear One Project:

https://sites.google.com/site/flightgearone/home

https://sites.google.com/site/flightgea ... g-aircraft

How to copy an existing aircraft (Cessna 172) and make changes to the texture. I had to do a step by step walk through as the process is not all that obvious:

https://sites.google.com/site/flightgea ... 172-step-1
openflight
 
Posts: 350
Joined: Fri Sep 16, 2011 11:14 am
Version: 1.0
OS: Lubuntu 16.04LTS

Re: Original Cessna 172p improvement

Postby openflight » Fri Jul 26, 2019 9:44 am

Here is the image of the aircraft in FG. The basic shape is OK but based on what I see on the aircraft walk-arounds and photos of the C 172 as well as prototypes of the 3D model I may decide do create a new 3D model of the Cessna 172.

Image

The basic model is good enough for now. First thing is to replace those seats, add a pilot and make the tires more like rubber instead of a wooden cut out. The entire plane is in .3ds format which is not store in a text format, so each animated part will have to be a separate file.

The .obj format is closer to the .ac and is human readable but materials will not show, and the airplane has to be rotate right 90 degrees in roll axis and also moved down.
Last edited by openflight on Sat Jul 27, 2019 2:26 pm, edited 2 times in total.
openflight
 
Posts: 350
Joined: Fri Sep 16, 2011 11:14 am
Version: 1.0
OS: Lubuntu 16.04LTS

Re: Original Cessna 172p improvement

Postby legoboyvdlp » Fri Jul 26, 2019 11:22 am

Why not use the 3D model of the c172p that comes with FlightGear (that is newer versions -- e.g. 2018.3) - the 3D model should still work in 1.0.
User avatar
legoboyvdlp
 
Posts: 6846
Joined: Sat Jul 26, 2014 1:28 am
Callsign: YV-LEGO
Version: 2018.3.1
OS: Windows 10 HP

Re: Original Cessna 172p improvement

Postby openflight » Sat Jul 27, 2019 2:24 pm

Thanks for the suggestion. Yes of course, that is what one would think, but the older model is sufficiently detailed to work on, and there are quite a few opportunities for improvement. It is a bit more of a challenge and there is greater freedom to make changes to the model.

I want to learn to develop 3D modeling skills as well, this is a good exercise. For some reason the newer FG Cessna does not load into a 3D viewer such as G3D.
openflight
 
Posts: 350
Joined: Fri Sep 16, 2011 11:14 am
Version: 1.0
OS: Lubuntu 16.04LTS

Re: Original Cessna 172p improvement

Postby openflight » Mon Jul 29, 2019 3:08 pm

Edit: This gallery is bound to show:

https://sites.google.com/site/flightgea ... ent-images


Scroll down - materials only, no textures has this been tried?:

https://sites.google.com/site/flightgea ... g-aircraft
openflight
 
Posts: 350
Joined: Fri Sep 16, 2011 11:14 am
Version: 1.0
OS: Lubuntu 16.04LTS


Return to Aircraft

Who is online

Users browsing this forum: Google [Bot] and 30 guests