Hi Ivan!
The Autopilot-Settings dialog is completely unfunctional for this airplane! You have to use the AP on the middle console! There is a small explanation of the AP in the README.md (really, really small, I have to admit...).
So,
- after pressing "d" once (or pressing the 'A/P' button), the AP is connected and keeps current pitch and levels wings first.
Pitch/Alt:
- You can then adjust Pitch by pushing up or pulling down one of the switches which are left and right from the "Roll" knob
(they have small effect, so push/pull a little longer)
- At desired Altitude, push button "KB" (bottom right); you're now in "Altitude Hold" mode; pushing or pulling one of the "pitch switches"*
gets you back to "Pitch" mode
- 4th switch (of the ones which are in line with the "A/P" button) enables/disables pitch/alt channel
"Heading", "Course" and "Roll":
- You can set these modes by using the 3rd switch (of the ones which are in line with the "A/P" button):
- Down ("ZK"): You can set desired Heading on the "ZK"-instrument - use Ctrl-C to find it
- middle: Roll mode, use Roll knob
- Up (GIK): Use Gyro Induction Kompass to follow current Course (not yet 100% correctly implemented)
"Horizon":
- Push that one to get back anytime to wings level and pitch 0
After all, all you need is the AP-console and the ZK-instrument... Keep away from F11!
You should have the correct version when you have downloaded from here (after 1st June):
https://github.com/maerchenprinz/an24bSo far,
Adrian
*Try to say "pitch-switches" fast and ten times in a row!