Board index FlightGear Development Aircraft

SU-37. ILS in HUD

Questions and discussion about creating aircraft. Flight dynamics, 3d models, cockpits, systems, animation, textures.

SU-37. ILS in HUD

Postby AAlex » Mon Sep 11, 2017 11:51 am

Good afternoon!
A wish appeared to put cross point indicators into head-up display from instrument loading system (especially while deck landing, first reference is below).
I found two sites where the thing is explained in detail:
http://wiki.flightgear.org/Howto:Carrie ... ant_in_HUD
http://wiki.flightgear.org/ILS_in_HUD
And is mentioned here:
http://warty.16mb.com/Aircraft/SU-37_info/
In the references the example for SU-37 is shown, but the problem occurred, the reference to a model v 0.7 (as I see, that very version is needed) is incorrect http://www.fguk.eu/index.php/hangar/sum ... su-37-v031. Again here is incorrect http://www.fguk.eu/index.php/hangar/sum ... su-37-v031. The model was found on forgotten ftp! The version is evidently not the last one.
I tried to create and adjust the files as in the second reference was mentioned. As a result, nothing happened (no errors in consoles were mentioned) either.
Most likely because of the absence of devices including HUD in this model.
After a few hours spent in Google, the problem hadn’t been solved…
If someone ever worked on this question, and is able to share either a model SU-37 v 0.7 or «working effective» advice (files hudGlass.ac, SU-37-set.xml, canvas-ILS.xml, hudCanvasILS.nas and especially screen-test.png). I will be very grateful to you.
AAlex
 
Posts: 2
Joined: Mon Sep 11, 2017 11:34 am

Re: SU-37. ILS in HUD

Postby StuartC » Mon Sep 11, 2017 12:59 pm

StuartC
 
Posts: 3175
Joined: Fri Jun 18, 2010 9:18 pm
Location: Arse end of the Universe
Callsign: WF01
Version: 2019.1
OS: W10 64 bit

Re: SU-37. ILS in HUD

Postby AAlex » Mon Sep 18, 2017 6:06 am

Thank you!
AAlex
 
Posts: 2
Joined: Mon Sep 11, 2017 11:34 am

Re: SU-37. ILS in HUD

Postby Ramanathan » Wed Aug 01, 2018 4:23 pm

I was working on this same model. I downloaded the Su-37 aircraft files from the link mentioned above and repeated all the procedures as explained in this wiki (http://wiki.flightgear.org/ILS_in_HUD#D ... _the_glass). But nothing has turned out. I'd be glad if I get some tips or the ILS-HUD files
Ramanathan
 
Posts: 7
Joined: Mon Jun 04, 2018 10:32 pm

Re: SU-37. ILS in HUD

Postby Warty » Mon Feb 04, 2019 5:09 pm

Here is something that might help:
https://www.dropbox.com/sh/wljx1xkr6pwi ... cilta?dl=0

Bear in mind that these are at least 3yrs old and were done for FG3.6 . . . . so some changes may be needed!
User avatar
Warty
 
Posts: 378
Joined: Sun Mar 29, 2015 7:53 pm
Location: Spain
Callsign: Warty
Version: 2020.4.0
OS: Mac OS 13


Return to Aircraft

Who is online

Users browsing this forum: No registered users and 10 guests