Board index FlightGear Development Aircraft

Announcing NEW Boeing 777 'Seattle' - Pre-Release

Questions and discussion about creating aircraft. Flight dynamics, 3d models, cockpits, systems, animation, textures.

Re: Announcing NEW Boeing 777 'Seattle' - Pre-Release

Postby Octal450 » Mon Sep 25, 2017 8:35 pm

OK Fine.

Kind Regards,
Josh
Skillset: JSBsim Flight Dynamics, Systems, Canvas, Autoflight/Control, Instrumentation, Animations
Aircraft: A320-family, MD-11, MD-80, Contribs in a few others

Octal450's GitHub|Launcher Catalog
|Airbus Dev Discord|Octal450 Hangar Dev Discord
User avatar
Octal450
 
Posts: 5583
Joined: Tue Oct 06, 2015 1:51 pm
Location: Huntsville, AL
Callsign: WTF411
Version: next
OS: Windows 11

Re: Announcing NEW Boeing 777 'Seattle' - Pre-Release

Postby sidi762 » Tue Sep 26, 2017 2:03 am

Guys, I've met a problem during the development of the CDU, the font.
This CDU is using osgText and I'm not planning to change it to canvas or something else, but I'm willing to use a better font for it. However, I didn't found any method to use a font besides the font in FGData. And unfourtunely, the cdu font in the FGData, which seems nice to use somehow, are missing support of lower case letter. Do someone knows what should I do?

Kind Regards,
Sidi
sidi762
 
Posts: 223
Joined: Sat Jun 18, 2016 9:15 am
Location: Beijing, China
Callsign: DAG0762
Version: 2020.3.18
OS: macOS Catalina

Re: Announcing NEW Boeing 777 'Seattle' - Pre-Release

Postby Isaak » Wed Nov 01, 2017 3:32 pm

it0uchpods wrote in Mon Sep 25, 2017 6:30 pm:4) I'll look into that, can you tell me, did the AP trim the plane? or it failed?


I 'm still experiencing this. When switching off the autopilot (setting /instrumentation/afds/inputs/AP to false via a Joystick button), the trim gets reset to 0, causing the plane to dive (because it was trimmed nose up according to the flap setting). I 've looked briefly to the AP-config file, but since I 'm not familiar with it I didn't find the logic that was causing this. Could you look into this? I'm taking the 777 to FSweekend and would like to display a flawless simulation to attract new users :)

I can look into it myself too, but since you are more familiar with it, I guess it 'll be more efficient if you did this.

Thanks a lot!
Want to support medical research with your pc? Start Folding at Home and join team FlightGear!
Isaak
 
Posts: 768
Joined: Sat Jun 04, 2011 3:52 pm
Location: Hamme, Belgium
Pronouns: he, him
Callsign: OO-ISA
Version: next
OS: Windows 10

Re: Announcing NEW Boeing 777 'Seattle' - Pre-Release

Postby Octal450 » Wed Nov 01, 2017 4:20 pm

OK, give me a few days. I'll get it fixed by Friday.

Kind Regards,
Josh
Skillset: JSBsim Flight Dynamics, Systems, Canvas, Autoflight/Control, Instrumentation, Animations
Aircraft: A320-family, MD-11, MD-80, Contribs in a few others

Octal450's GitHub|Launcher Catalog
|Airbus Dev Discord|Octal450 Hangar Dev Discord
User avatar
Octal450
 
Posts: 5583
Joined: Tue Oct 06, 2015 1:51 pm
Location: Huntsville, AL
Callsign: WTF411
Version: next
OS: Windows 11

Re: Announcing NEW Boeing 777 'Seattle' - Pre-Release

Postby Isaak » Wed Nov 01, 2017 5:00 pm

Thanks a lot! Don't feel pressured, I 'm late with this reminder also so no hard feelings if you don't solve it by then. I 'll take a look later today also, maybe I can help you out :)
Want to support medical research with your pc? Start Folding at Home and join team FlightGear!
Isaak
 
Posts: 768
Joined: Sat Jun 04, 2011 3:52 pm
Location: Hamme, Belgium
Pronouns: he, him
Callsign: OO-ISA
Version: next
OS: Windows 10

Re: Announcing NEW Boeing 777 'Seattle' - Pre-Release

Postby Octal450 » Wed Nov 01, 2017 5:15 pm

I know why the problem happens, due to the way the auto trim systems works... So I'll redesign it.

Kind Regards,
Josh
Skillset: JSBsim Flight Dynamics, Systems, Canvas, Autoflight/Control, Instrumentation, Animations
Aircraft: A320-family, MD-11, MD-80, Contribs in a few others

Octal450's GitHub|Launcher Catalog
|Airbus Dev Discord|Octal450 Hangar Dev Discord
User avatar
Octal450
 
Posts: 5583
Joined: Tue Oct 06, 2015 1:51 pm
Location: Huntsville, AL
Callsign: WTF411
Version: next
OS: Windows 11

Re: Announcing NEW Boeing 777 'Seattle' - Pre-Release

Postby Clive2670 » Wed Nov 01, 2017 8:30 pm

BEL ISAAK wrote in Wed Nov 01, 2017 3:32 pm:
it0uchpods wrote in Mon Sep 25, 2017 6:30 pm:4) I'll look into that, can you tell me, did the AP trim the plane? or it failed?


I 'm still experiencing this. When switching off the autopilot (setting /instrumentation/afds/inputs/AP to false via a Joystick button), the trim gets reset to 0, causing the plane to dive (because it was trimmed nose up according to the flap setting). I 've looked briefly to the AP-config file, but since I 'm not familiar with it I didn't find the logic that was causing this. Could you look into this? I'm taking the 777 to FSweekend and would like to display a flawless simulation to attract new users :)

I can look into it myself too, but since you are more familiar with it, I guess it 'll be more efficient if you did this.

Thanks a lot!

Yes I have exactly the same problems, I have to hold my joystick nearly right back to prevent a very sudden and SHARP nose dive towards the ground!!! When streaming live on Youtube makes me look like a complete novice!!! :oops:
Thanks Clive aka: G-BLS01
Can be seen flying the Boeing 777-200LR
Toshiba laptop,
Intel i5 4210U,
16Gb RAM,
AMD R7-M260 graphics 2Gb RAM
Clive2670
 
Posts: 589
Joined: Mon Feb 08, 2016 8:11 pm
Location: Anywhere in the World at some point on Flightgear!
Callsign: G-BLS01
Version: 2018.3.1
OS: Windows 10 64bit

Re: Announcing NEW Boeing 777 'Seattle' - Pre-Release

Postby Octal450 » Wed Nov 01, 2017 9:36 pm

See my above post. Will fix soon.

Kind Regards,
Josh
PS: it really needs proper flybywire. That would further help this, and make the logic for autotrim easier.
Skillset: JSBsim Flight Dynamics, Systems, Canvas, Autoflight/Control, Instrumentation, Animations
Aircraft: A320-family, MD-11, MD-80, Contribs in a few others

Octal450's GitHub|Launcher Catalog
|Airbus Dev Discord|Octal450 Hangar Dev Discord
User avatar
Octal450
 
Posts: 5583
Joined: Tue Oct 06, 2015 1:51 pm
Location: Huntsville, AL
Callsign: WTF411
Version: next
OS: Windows 11

Re: Announcing NEW Boeing 777 'Seattle' - Pre-Release

Postby Clive2670 » Wed Nov 01, 2017 11:17 pm

Thanks Josh! Keep up the good work!
Thanks Clive aka: G-BLS01
Can be seen flying the Boeing 777-200LR
Toshiba laptop,
Intel i5 4210U,
16Gb RAM,
AMD R7-M260 graphics 2Gb RAM
Clive2670
 
Posts: 589
Joined: Mon Feb 08, 2016 8:11 pm
Location: Anywhere in the World at some point on Flightgear!
Callsign: G-BLS01
Version: 2018.3.1
OS: Windows 10 64bit

Re: Announcing NEW Boeing 777 'Seattle' - Pre-Release

Postby Octal450 » Thu Nov 02, 2017 12:41 am

No problem. and Thanks!

Kind Regards,
Josh
Skillset: JSBsim Flight Dynamics, Systems, Canvas, Autoflight/Control, Instrumentation, Animations
Aircraft: A320-family, MD-11, MD-80, Contribs in a few others

Octal450's GitHub|Launcher Catalog
|Airbus Dev Discord|Octal450 Hangar Dev Discord
User avatar
Octal450
 
Posts: 5583
Joined: Tue Oct 06, 2015 1:51 pm
Location: Huntsville, AL
Callsign: WTF411
Version: next
OS: Windows 11

Re: Announcing NEW Boeing 777 'Seattle' - Pre-Release

Postby Octal450 » Thu Nov 02, 2017 3:28 am

Hey
It's fixed and available

Hopefully Hyde merges into his gitlab soon.

Kind Regards,
Josh
Last edited by Octal450 on Thu Feb 15, 2024 8:25 am, edited 1 time in total.
Skillset: JSBsim Flight Dynamics, Systems, Canvas, Autoflight/Control, Instrumentation, Animations
Aircraft: A320-family, MD-11, MD-80, Contribs in a few others

Octal450's GitHub|Launcher Catalog
|Airbus Dev Discord|Octal450 Hangar Dev Discord
User avatar
Octal450
 
Posts: 5583
Joined: Tue Oct 06, 2015 1:51 pm
Location: Huntsville, AL
Callsign: WTF411
Version: next
OS: Windows 11

Re: Announcing NEW Boeing 777 'Seattle' - Pre-Release

Postby Isaak » Thu Nov 02, 2017 7:53 am

Thank you so much! You're genius!
Want to support medical research with your pc? Start Folding at Home and join team FlightGear!
Isaak
 
Posts: 768
Joined: Sat Jun 04, 2011 3:52 pm
Location: Hamme, Belgium
Pronouns: he, him
Callsign: OO-ISA
Version: next
OS: Windows 10

Re: Announcing NEW Boeing 777 'Seattle' - Pre-Release

Postby Octal450 » Thu Nov 02, 2017 1:10 pm

Thanks!

No problem. Thanks for reporting it.

Kind Regards,
Josh
Skillset: JSBsim Flight Dynamics, Systems, Canvas, Autoflight/Control, Instrumentation, Animations
Aircraft: A320-family, MD-11, MD-80, Contribs in a few others

Octal450's GitHub|Launcher Catalog
|Airbus Dev Discord|Octal450 Hangar Dev Discord
User avatar
Octal450
 
Posts: 5583
Joined: Tue Oct 06, 2015 1:51 pm
Location: Huntsville, AL
Callsign: WTF411
Version: next
OS: Windows 11

Re: Announcing NEW Boeing 777 'Seattle' - Pre-Release

Postby SP-KOK » Thu Nov 02, 2017 6:50 pm

Liveries for 777-300 :)

Link download:
https://drive.google.com/open?id=0B6Fen ... XVjTUhhQms



Image
Image


I think you can add these two liveries to git for this model 777-300
Last edited by SP-KOK on Thu Nov 02, 2017 8:57 pm, edited 1 time in total.
SP-KOK
 
Posts: 679
Joined: Tue Feb 02, 2016 6:04 pm

Re: Announcing NEW Boeing 777 'Seattle' - Pre-Release

Postby Clive2670 » Thu Nov 02, 2017 7:01 pm

it0uchpods wrote in Thu Nov 02, 2017 3:28 am:Hey
It's fixed and available in:

http://www.gitlab.com/it0uchpods/fg777_seattle.git

And

http://www.github.com/FGMEMBERS/777.git

Hopefully Hyde merges into his gitlab soon.

Kind Regards,
Josh

Well done thanks Josh!
Thanks Clive aka: G-BLS01
Can be seen flying the Boeing 777-200LR
Toshiba laptop,
Intel i5 4210U,
16Gb RAM,
AMD R7-M260 graphics 2Gb RAM
Clive2670
 
Posts: 589
Joined: Mon Feb 08, 2016 8:11 pm
Location: Anywhere in the World at some point on Flightgear!
Callsign: G-BLS01
Version: 2018.3.1
OS: Windows 10 64bit

PreviousNext

Return to Aircraft

Who is online

Users browsing this forum: No registered users and 11 guests