thanks for the link HHS, i will have to leave that for DFABER (my germans not so good)
here's a list of what is left to do ,plus many of the specs for the Eurofighter.
TO DO LIST
textures required, only some of the textures appear to be exporting from sketchup? model requires some good realistic textures, possibly similar to flying toasters F14 Tomcat.
Airbrake behind the cockpit has not been done, i forgot about it.
Animations
All components that require animating have been made into seperate groups.
landing gear. opening of the gear doors and then gear up/down.
front canards, angle to 90 degrees also used as airbrakes on landing.
nav lights (port starboard,tail)
throttle movement syncronized with the thrust. (similar to harrier model)
rear parachute deployment on landing (similar to sr-71 or vulcan bomber)
afterburner flames
Eurofighter Flight Information
canard wing area 2.4 m2
wing sweep angle 53 degrees
wing incident angle 0 degrees
wing twist max 5 degrees
wing aspect ratio 2:205
dihedral angle 0 degrees
thrust - weight ratio 8.7 : 1
thrust 60kn - 13490lb each (without AB)
90.1kn - 20,250 each (with AB)
max speed mach 2.0
supercruise mach 1.3 (without AB @36,000ft)
stall speed 110 knots
angle of attack max 70 degrees
ceiling height 60,000ft/18290m
brakes off to 35000ft <2.5 min
brakes off to 110knots 8 seconds
200knots to mach 1 30 seconds
G limits +9g -3g
Fuel tanks
internal fuel capacity 5,700L
external fuel tanks (2 x 1000L marked C)
empty mass 24,250LB/11010kg
max take off mass 51,809LB/23,521kg
hope this information will be of use when the model is ready.
i know it is a lot to ask someone to do, any help would be appreciated.
I'll upload the model or send it if anyone can help.
Thanks
Alex