Lately when I start FlightGear with A320 or B777, I got a different panel on top of it making the plane unusable. How can I fix this?
e.g. this is how my 777 cockpit looks like:
I am on Windows 10, FG 2020.3.11.
FlightGear Forum
Board index ‹ FlightGear ‹ Support ‹ Graphics
Cessna panel showing on top
Forum rules
In order to help you, we need to know a lot of information. Make sure to include answers to at least the following questions in your initial post.
- what OS (Windows Xp/Vista, Mac etc.) are you running?
- what FlightGear version do you use?
- what graphics card do you have?
- does the problem occur with any aircraft, at any airport?
- is there any output printed to the console (black window)?
- copy&paste your commandline (tick the "Show commandline box on the last page of FGRun or the "Others" section on the Mac launcher).
- please upload a screenshot of the problem.
If you experience FlightGear crashes, please report a bug using the issue tracker (can be also used for feature requests).
To run FlightGear on old computers with bad OpenGL support, please take a look at this wiki article. If you are seeing corrupted/broken textures, please see this article.
Note: If you did not get a reponse, even after 7 days, you may want to check out the FlightGear mailing lists to ask your question there.
In order to help you, we need to know a lot of information. Make sure to include answers to at least the following questions in your initial post.
- what OS (Windows Xp/Vista, Mac etc.) are you running?
- what FlightGear version do you use?
- what graphics card do you have?
- does the problem occur with any aircraft, at any airport?
- is there any output printed to the console (black window)?
- copy&paste your commandline (tick the "Show commandline box on the last page of FGRun or the "Others" section on the Mac launcher).
- please upload a screenshot of the problem.
If you experience FlightGear crashes, please report a bug using the issue tracker (can be also used for feature requests).
To run FlightGear on old computers with bad OpenGL support, please take a look at this wiki article. If you are seeing corrupted/broken textures, please see this article.
Note: If you did not get a reponse, even after 7 days, you may want to check out the FlightGear mailing lists to ask your question there.
4 posts
• Page 1 of 1
Cessna panel showing on top
by tieum » Fri Nov 12, 2021 7:48 pm
Hello,
Lately when I start FlightGear with A320 or B777, I got a different panel on top of it making the plane unusable. How can I fix this?
e.g. this is how my 777 cockpit looks like:
I am on Windows 10, FG 2020.3.11.
Lately when I start FlightGear with A320 or B777, I got a different panel on top of it making the plane unusable. How can I fix this?
e.g. this is how my 777 cockpit looks like:
I am on Windows 10, FG 2020.3.11.
- tieum
- Posts: 4
- Joined: Sun Dec 02, 2007 12:15 am
Re: Cessna panel showing on top
by Gijs » Fri Nov 12, 2021 8:09 pm
Hi and welcome back!
Try pressing Shift-P
Try pressing Shift-P
Airports: EHAM, EHLE, KSFO
Aircraft: 747-400
Aircraft: 747-400
-
Gijs - Moderator
- Posts: 9549
- Joined: Tue Jul 03, 2007 3:55 pm
- Location: Delft, the Netherlands
- Callsign: PH-GYS
- Version: Git
- OS: Windows 10
Re: Cessna panel showing on top
by wkitty42 » Sat Nov 13, 2021 1:00 pm
yeah, don't press SHIFT-P in any craft unless you really do intend to use whatever it provides... check the F10->Help menu for the various keys used in the craft and the sim... some are global to the sim while others are specific to the craft...
"You get more air close to the ground," said Angalo. "I read that in a book. You get lots of air low down, and not much when you go up."
"Why not?" said Gurder.
"Dunno. It's frightened of heights, I guess."
"Why not?" said Gurder.
"Dunno. It's frightened of heights, I guess."
-
wkitty42 - Posts: 9165
- Joined: Fri Feb 20, 2015 4:46 pm
- Location: central NC, USA
- Callsign: wk42
- Version: git next
- OS: Kubuntu 22.04
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests