Board index FlightGear Support Flying

Sound problems since Flightgear 2020.3.14

Controlling your aircraft, using the autopilot etc.

Sound problems since Flightgear 2020.3.14

Postby FoxtrotCC » Sun Oct 02, 2022 11:22 am

OS - Windows 7 64Bit
Version 2020.3.14

Test conditions:
Plane -> Different, tested with Cessna 172P & DHC6 & Lockheed 1049H

Since FlightGear 2020.3.14 i have a strange behavior. Some sounds only play once in a FlightGear session. Example Cessna 172P switches (exemplary Taxi-, Landing-, Nav-, Beacon, Strobelight switches). Sound only play once on use and then never more (until you start FG again).

DHC6 exemplary Master switch, Auto feather switch @ other

1049H exemplary Crew door open / close sound

Up to version 2020.3.13 everything was fine and sounds play normally on use. Can anyone confirm that?

Greets Foxtrot
Last edited by FoxtrotCC on Sat Oct 08, 2022 3:59 pm, edited 1 time in total.
User avatar
FoxtrotCC
 
Posts: 97
Joined: Mon Jan 10, 2022 12:18 pm
Location: Germany
Version: 2020.3.19
OS: Win10/64

Re: Sound problems since Flightgear 2020.3.14

Postby FoxtrotCC » Sun Oct 02, 2022 1:42 pm

A much bigger problem is, if you want to fly from VOR to VOR (or NDB) and check the Station code (Morse code) to see/hear if the VOR/NDB is in your range. You can only hear this code (completly or not completly) once. After that you can wait forever to hear another Code from the same VOR/NDB station, or change the Frequencies from your VOR/NDB receiver to hear another Station Code (once).

Greets Foxtrot
User avatar
FoxtrotCC
 
Posts: 97
Joined: Mon Jan 10, 2022 12:18 pm
Location: Germany
Version: 2020.3.19
OS: Win10/64

Re: Sound problems since Flightgear 2020.3.14

Postby polly » Sun Oct 02, 2022 4:42 pm

Lucky you, I got nothin !

So far, on 'next' I can't hear a peep from NAV1 / NAV2 when sitting close to an airport where I thought the Nav tones would be active.
It'll take a while to work back to earlier builds. There's been activity on audio threads lately so if you get convinced it's an issue, maybe a ticket would be the ticket.
User avatar
polly
 
Posts: 956
Joined: Thu Nov 04, 2010 3:45 pm

Re: Sound problems since Flightgear 2020.3.14

Postby FoxtrotCC » Sat Oct 08, 2022 3:33 pm

Thanks for your feedback Polly!

Even if not many have come forward, but I guess we are not alone with this issue . So I will create a Ticket.

Greets Foxtrot
User avatar
FoxtrotCC
 
Posts: 97
Joined: Mon Jan 10, 2022 12:18 pm
Location: Germany
Version: 2020.3.19
OS: Win10/64

Re: Sound problems since Flightgear 2020.3.14

Postby polly » Sat Oct 08, 2022 3:49 pm

Thilo Schürmann raised this issue on the development mailing list so the solution may be there.
User avatar
polly
 
Posts: 956
Joined: Thu Nov 04, 2010 3:45 pm

Re: Sound problems since Flightgear 2020.3.14

Postby FoxtrotCC » Sat Oct 08, 2022 4:03 pm

Thank you for the Info! :-)

2020.3.15 (don`t) solve the problems. Now the Version crashes permanetly (If you switch from one VOR Morse code to another station to hear the new Code...)
User avatar
FoxtrotCC
 
Posts: 97
Joined: Mon Jan 10, 2022 12:18 pm
Location: Germany
Version: 2020.3.19
OS: Win10/64


Return to Flying

Who is online

Users browsing this forum: No registered users and 2 guests