Board index FlightGear Support Flying

Tutorial "Takeoff"

Controlling your aircraft, using the autopilot etc.

Tutorial "Takeoff"

Postby hkwmon » Fri Jul 27, 2018 10:30 am

Hi,
I have installed the latest FlightGear version 2018.2.2.0.
I started the tutorial "Takeoff".
The engine is running and now the text
-Release the Parking brake "Schift B"
I have seen parking brake is OFF, the lever is horizontal
and then the next text
-Smootly apply full power using PgUp controlling the direction of the nose wheel
I have increased the speed up to 2300 RPM.
But the plane does not move. I also do not see a horizon.
hkwmon
 
Posts: 5
Joined: Fri May 18, 2018 4:28 pm
Location: Switzerland
Version: 2018.1.1
OS: Windows 10

Re: Tutorial "Takeoff"

Postby Thorsten » Fri Jul 27, 2018 12:39 pm

Probably you have no terrain installed either if you don't see a horizon - why don't you do that for the tutorial location and see if things get better?
Thorsten
 
Posts: 9744
Joined: Mon Nov 02, 2009 8:33 am

Re: Tutorial "Takeoff"

Postby GreatPilot8 » Tue Aug 14, 2018 4:29 pm

Check your settings:
Maybe the plane has the wheel chokes on.
If so either click on "Cessna 172">"Settings" & uncheck the box saying "Enable safety" or something similar or
get out of your plane & click on the chokes.
Reply if it worked.
GreatPilot8
 
Posts: 6
Joined: Tue Aug 07, 2018 9:15 pm


Return to Flying

Who is online

Users browsing this forum: No registered users and 4 guests