GAME CRASH NEED HELP PLS

[Bulldog 1]

Sounds like too little memory. You can open the task manager and watch the system monitor. Watch the RAM usage, you will more than likely see a gradual increase in RAM used until FlightGear crashes and then your memory returned. I suspect this is your problem, especially if your seeing this with all aircraft other than the UFO. Or even the UFO after extended use.

You do have some options.
1) Use the older, lower resolution scenery.
2)Optimize FG to use less memory.

There are several forum threads detailing this and also plenty of FlightGear Wiki information on this subject.
It's going to take some searching in both the Wiki and forum unless someone else can readily point you to the specific information.

How can optimize FG? I have the settings at the lowest graphics

[wkitty42]

we're not talking about drive space (aka static storage memory)... we're talking about RAM memory...

[Bulldog 1]

Fliying With a320Family from @it0uchpods

<?xml version="1.0" encoding="UTF-8" ?>
<CrashRpt version="1403">
<CrashGUID>b9b56235-2d8f-400c-9200-86f8f7bcb071</CrashGUID>
<AppName>FlightGear</AppName>
<AppVersion>2017.2.1</AppVersion>
<ImageName>C:\Program Files\FlightGear 2017.2.1\bin\fgfs.exe</ImageName>
<OperatingSystem>Windows 8.1 Pro Build 9600</OperatingSystem>
<OSIs64Bit>0</OSIs64Bit>
<GeoLocation>es-es</GeoLocation>
<SystemTimeUTC>2017-08-28T15:57:34Z</SystemTimeUTC>
<ExceptionAddress>0x73d735d0</ExceptionAddress>
<ExceptionModule>C:\Program Files\FlightGear 2017.2.1\bin\CrashRpt1403.dll</ExceptionModule>
<ExceptionModuleBase>0x73d70000</ExceptionModuleBase>
<ExceptionModuleVersion>1.4.0.3</ExceptionModuleVersion>
<ExceptionType>4</ExceptionType>
<GUIResourceCount>100</GUIResourceCount>
<OpenHandleCount>1115</OpenHandleCount>
<MemoryUsageKbytes>1278192</MemoryUsageKbytes>
<CustomProps>
<Prop name="build-type" value="Release" />
<Prop name="git-revision" value="0cf65813cca08eb49f97f573c9f549607161af88" />
<Prop name="hudson-build-id" value="219" />
<Prop name="hudson-build-number" value="219" />
</CustomProps>
<FileList>
<FileItem name="crashdump.dmp" description="Crash Minidump" />
<FileItem name="crashrpt.xml" description="Crash Description XML" />
<FileItem name="fgfs.log" description="FlightGear Log File" />
</FileList>
</CrashRpt>

[bugman]

@Bulldog 1: These reports unfortunately do not give enough information to know what went wrong. As suggested earlier, have you run a memtest86+ bootbable cd on your system to check your RAM? It is probably not the issue, but it would be good to test. Again note that the tests can take hours to days.

Regards,
Edward

[Bulldog 1]

I have Win 32, i think i can't run that thing, isn't it @bugman?

[Bulldog 1]

Here is the fgfs.log of the crash, i was with the Citation at luoxemburg, as you can see here

general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\fg_init.cxx:424:Created multi-app mutex, we are in writeable mode
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\main.cxx:443:CrashRpt enabled
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\main.cxx:470:FlightGear: Version 2017.2.1
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\main.cxx:471:FlightGear: Build Type Release
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\main.cxx:472:Built with Microsoft Visual C++ version 1900
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\main.cxx:474:Jenkins number/ID 219:219
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\options.cxx:2832:platform default fg_root = Path "../data"
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\fg_init.cxx:505:Reading global defaults
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\fg_init.cxx:515:Finished Reading global defaults
input:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\globals.cxx:790:Reading user settings from Path "C:/Users/Luis/AppData/Roaming/flightgear.org/autosave_2017_2.xml"
navaid:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Navaids\NavDataCache.cxx:261:NavCache at:Path "C:/Users/Luis/AppData/Roaming/flightgear.org/navdata_2017_2.cache"
navaid:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Navaids\NavDataCache.cxx:264:NavCache read-only flags is:0
navaid:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Navaids\NavDataCache.cxx:1347:NavCache: no main cache rebuild required
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\fg_init.cxx:1181:init package root at:Path "C:/Users/Luis/Documents/FlightGear/Aircraft"
gui:4::0:libpng warning: iCCP: known incorrect sRGB profile
gui:4::0:libpng warning: iCCP: known incorrect sRGB profile
navaid:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Airports\xmlloader.cxx:52:reading groundnet data from Path "C:/Users/Luis/Documents/FlightGear/TerraSync/Airports/E/L/L/ELLX.groundnet.xml"
navaid:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Airports\xmlloader.cxx:62:parsing groundnet XML took 16
input:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\options.cxx:2135:aircraft = org.flightgear.fgaddon.Citation-II
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\fg_init.cxx:575:Loading aircraft from package:org.flightgear.fgaddon.Citation-II
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\fg_init.cxx:211:found aircraft in dir: C:/Users/Luis/Documents/FlightGear/Aircraft/org.flightgear.fgaddon/Aircraft/Citation
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\locale.cxx:138:Found language resource for: es_ES
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\locale.cxx:221:Reading localized strings for 'en' from Path "C:/Program Files/FlightGear 2017.2.1/data/Translations/en/sys.xml"
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\locale.cxx:221:Reading localized strings for 'es' from Path "C:/Program Files/FlightGear 2017.2.1/data/Translations/es/sys.xml"
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\locale.cxx:221:Reading localized strings for 'en' from Path "C:/Program Files/FlightGear 2017.2.1/data/Translations/en/atc.xml"
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\locale.cxx:221:Reading localized strings for 'es' from Path "C:/Program Files/FlightGear 2017.2.1/data/Translations/en/atc.xml"
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\locale.cxx:221:Reading localized strings for 'en' from Path "C:/Program Files/FlightGear 2017.2.1/data/Translations/en/tips.xml"
general:4:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\locale.cxx:214:No path in /sim[0]/intl[0]/locale[1]/strings[0]/tips.
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\options.cxx:2441: option:aircraft = org.flightgear.fgaddon.Citation-II
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\options.cxx:2441: option:airport = ELLX
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\options.cxx:2441: option:parkpos = West_Hangars
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\options.cxx:2441: option:disable-auto-coordination =
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\options.cxx:2441: option:prop = /sim/multiplay/txhost=mpserver01.flightgear.org
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\options.cxx:2441: option:prop = /sim/multiplay/txport=5000
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\options.cxx:2441: option:callsign = SPN2545
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\options.cxx:2441: option:disable-terrasync =
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\options.cxx:2441: option:enable-fullscreen =
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\options.cxx:2441: option:prop = /sim/rendering/multi-sample-buffers=true
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\options.cxx:2441: option:prop = /sim/rendering/multi-samples=2
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\options.cxx:2441: option:disable-rembrandt =
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\options.cxx:2441: option:season = summer
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\options.cxx:2441: option:enable-real-weather-fetch =
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\options.cxx:2441: option:launcher =
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\options.cxx:2466:Using default download dir: Path "C:/Users/Luis/Documents/FlightGear"
general:4:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\globals.cxx:390:read-allowed path not found:Path "C:/Users/Luis/Documents/FlightGear/AI"
general:4:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\globals.cxx:390:read-allowed path not found:Path "C:/Users/Luis/Documents/FlightGear/Liveries"
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\options.cxx:2491:Using TerraSync dir: Path "C:/Users/Luis/Documents/FlightGear/TerraSync"
astro:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\scene\sky\cloud.cxx:343:initializing cloud layers
general:4:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\main.cxx:557:Enabling ATI/AMD viewport hack
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\fg_init.cxx:708:Configuration State
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\fg_init.cxx:709:======= ==============
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\fg_init.cxx:711:aircraft-dir = "C:/Users/Luis/Documents/FlightGear/Aircraft/org.flightgear.fgaddon/Aircraft/Citation"
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\fg_init.cxx:712:fghome-dir = "Path "C:/Users/Luis/AppData/Roaming/flightgear.org""
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\fg_init.cxx:713:download-dir = "C:/Users/Luis/Documents/FlightGear"
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\fg_init.cxx:714:terrasync-dir = "C:/Users/Luis/Documents/FlightGear/TerraSync"
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\fg_init.cxx:716:aircraft-search-paths =
C:/Users/Luis/Documents/FlightGear/Aircraft/org.flightgear.fgaddon
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\fg_init.cxx:717:scenery-search-paths =
C:/Users/Luis/Documents/FlightGear/TerraSync
C:/Program Files/FlightGear 2017.2.1/data/Scenery
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\GUI\gui.cxx:121:NVIDIA Corporation
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\GUI\gui.cxx:124:GeForce 315/PCIe/SSE2
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\GUI\gui.cxx:127:3.3.0
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\GUI\gui.cxx:137:3.30 NVIDIA via Cg compiler
view:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Viewer\splash.cxx:678:Splash screen progress loading-aircraft-list
view:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Viewer\splash.cxx:678:Splash screen progress loading-nav-dat
view:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Viewer\splash.cxx:678:Splash screen progress init-scenery
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\fg_init.cxx:674:General Initialization
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\fg_init.cxx:675:======= ==============
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\fg_init.cxx:684:FG_ROOT = "Path "C:/Program Files/FlightGear 2017.2.1/data""

event:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\timing\sg_time.cxx:84:Reading timezone info from: Path "C:/Program Files/FlightGear 2017.2.1/data/Timezone/zone.tab"
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\scenery.cxx:353:Selected scenery is tilecache
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\terrain_stg.cxx:244:FGStgTerrain::init - init tilemgr
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:156:Initializing Tile Manager subsystem.
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilecache.cxx:64:Initializing the tile cache.
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilecache.cxx:67: max cache size = 100
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilecache.cxx:69: current cache size = 0
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilecache.cxx:73: done with init()
view:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Viewer\splash.cxx:678:Splash screen progress finalize-position
view:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Viewer\splash.cxx:678:Splash screen progress creating-subsystems
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\fg_init.cxx:726:Creating Subsystems
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\fg_init.cxx:727:========== ==========
input:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\scene\material\matlib.cxx:74:Reading materials from C:/Program Files/FlightGear 2017.2.1/data/Materials/regions/materials.xml
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Systems\system_mgr.cxx:41:Reading systems from Path "C:/Users/Luis/Documents/FlightGear/Aircraft/org.flightgear.fgaddon/Aircraft/Citation/Systems/systems.xml"
cockpit:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Instrumentation\HUD\HUD.cxx:116:Initializing HUD Instrument
sound:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Sound\fg_fx.cxx:122:Reading sound sound from Path "C:/Users/Luis/Documents/FlightGear/Aircraft/org.flightgear.fgaddon/Aircraft/Citation/Citation-II-sound.xml"
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\main.cxx:324:Creating subsystems took:2735
view:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Viewer\splash.cxx:678:Splash screen progress binding-subsystems
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\main.cxx:332:Binding subsystems took:15
view:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Viewer\splash.cxx:678:Splash screen progress init-subsystems
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\locale.cxx:221:Reading localized strings for 'en' from Path "C:/Program Files/FlightGear 2017.2.1/data/Translations/en/menu.xml"
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\locale.cxx:221:Reading localized strings for 'es' from Path "C:/Program Files/FlightGear 2017.2.1/data/Translations/es/menu.xml"
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\GUI\FGPUIMenuBar.cxx:56:Initializing old dialog commands:
environment:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Environment\realwx_ctrl.cxx:325:Reusing metar properties at /environment[0]/metar[0] for
environment:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Environment\realwx_ctrl.cxx:335:Adding metar properties at /environment[0]/metar[1] for
environment:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Environment\realwx_ctrl.cxx:335:Adding metar properties at /environment[0]/metar[2] for
environment:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Environment\realwx_ctrl.cxx:335:Adding metar properties at /environment[0]/metar[3] for
environment:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Environment\realwx_ctrl.cxx:335:Adding metar properties at /environment[0]/metar[4] for
environment:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Environment\realwx_ctrl.cxx:335:Adding metar properties at /environment[0]/metar[5] for
environment:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Environment\realwx_ctrl.cxx:335:Adding metar properties at /environment[0]/metar[6] for
environment:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Environment\realwx_ctrl.cxx:335:Adding metar properties at /environment[0]/metar[10] for
environment:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Environment\realwx_ctrl.cxx:335:Adding metar properties at /environment[0]/metar[11] for
environment:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Environment\realwx_ctrl.cxx:390:NoaaMetarRealWxController::update(): nearest airport with METAR has changed. Old: '', new: 'ELLX'
environment:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Environment\realwx_ctrl.cxx:481:NoaaMetarRealWxController::update(): spawning load request for station-id 'ELLX'
astro:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\ephemeris\stardata.cxx:58: Loading stars from Path "C:/Program Files/FlightGear 2017.2.1/data/Astro/stars"
astro:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\ephemeris\stardata.cxx:114: Loaded 3141 stars
autopilot:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Autopilot\autopilotgroup.cxx:201:Reading property-rule configuration from Path "C:/Program Files/FlightGear 2017.2.1/data/Environment/metarinterpolator.xml"
autopilot:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Autopilot\autopilotgroup.cxx:208:adding property-rule subsystem Environment METAR Interpolation Rule
autopilot:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Autopilot\autopilotgroup.cxx:201:Reading property-rule configuration from Path "C:/Program Files/FlightGear 2017.2.1/data/Environment/interpolator.xml"
autopilot:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Autopilot\autopilotgroup.cxx:208:adding property-rule subsystem Environment Interpolation Rule
autopilot:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Autopilot\autopilotgroup.cxx:201:Reading property-rule configuration from Path "C:/Program Files/FlightGear 2017.2.1/data/Environment/local-weather-rules.xml"
autopilot:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Autopilot\autopilotgroup.cxx:208:adding property-rule subsystem Local Weather Rules
autopilot:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Autopilot\autopilotgroup.cxx:201:Reading property-rule configuration from Path "C:/Program Files/FlightGear 2017.2.1/data/Aircraft/Generic/g-forces.xml"
autopilot:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Autopilot\autopilotgroup.cxx:208:adding property-rule subsystem g force effects
autopilot:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Autopilot\autopilotgroup.cxx:201:Reading property-rule configuration from Path "C:/Users/Luis/Documents/FlightGear/Aircraft/org.flightgear.fgaddon/Aircraft/Citation/Models/Instruments/instrument-filters.xml"
autopilot:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Autopilot\autopilotgroup.cxx:208:adding property-rule subsystem unnamed_autopilot_100
autopilot:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Autopilot\autopilotgroup.cxx:201:Reading property-rule configuration from Path "C:/Users/Luis/Documents/FlightGear/Aircraft/org.flightgear.fgaddon/Aircraft/Citation/Models/load-factor-filters.xml"
autopilot:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Autopilot\autopilotgroup.cxx:208:adding property-rule subsystem unnamed_autopilot_101
autopilot:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Autopilot\autopilotgroup.cxx:201:Reading property-rule configuration from Path "C:/Users/Luis/Documents/FlightGear/Aircraft/org.flightgear.fgaddon/Aircraft/Citation/Models/Lights/average-ambient-light-filters.xml"
autopilot:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Autopilot\autopilotgroup.cxx:208:adding property-rule subsystem unnamed_autopilot_102
autopilot:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Autopilot\autopilotgroup.cxx:201:Reading property-rule configuration from Path "C:/Users/Luis/Documents/FlightGear/Aircraft/org.flightgear.fgaddon/Aircraft/Citation/Systems/electrical.xml"
autopilot:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Autopilot\autopilotgroup.cxx:208:adding property-rule subsystem unnamed_autopilot_103
autopilot:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Autopilot\autopilotgroup.cxx:201:Reading property-rule configuration from Path "C:/Users/Luis/Documents/FlightGear/Aircraft/org.flightgear.fgaddon/Aircraft/Citation/Models/Effects/flame-filter.xml"
autopilot:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Autopilot\autopilotgroup.cxx:208:adding property-rule subsystem unnamed_autopilot_104
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:63:FlightRecorder: Recorder configuration #0
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:97:FlightRecorder: Using custom recorder configuration: Citation II - Flight Recorder
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/orientation/alpha-deg'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/orientation/side-slip-rad'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/orientation/beta-deg'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/orientation/roll-rate-degps'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/orientation/pitch-rate-degps'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/orientation/yaw-rate-degps'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/velocities/vertical-speed-fps'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/accelerations/pilot/x-accel-fps_sec'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/accelerations/pilot/y-accel-fps_sec'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/instrumentation/slip-skid-ball/indicated-slip-skid'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/surface-positions/elevator-pos-norm'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/surface-positions/elevator-trim-tab-pos-norm'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/surface-positions/left-aileron-pos-norm'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/surface-positions/right-aileron-pos-norm'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/surface-positions/rudder-pos-norm'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/surface-positions/spoilers-pos-norm'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/surface-positions/nose-wheel-pos-norm'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/systems/electrical/outputs/fuel-pump[0]'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/systems/electrical/outputs/fuel-pump[1]'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/engines/engine[0]/n1'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/engines/engine[1]/n1'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/engines/engine[0]/n2'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/engines/engine[1]/n2'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/engines/engine[0]/thrust-lbs'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/engines/engine[1]/thrust-lbs'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/engines/engine[0]/egt-degf'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/engines/engine[1]/egt-degf'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/engines/engine[0]/epr'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/engines/engine[1]/epr'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/engines/engine[0]/oil-pressure-psi'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/engines/engine[1]/oil-pressure-psi'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/consumables/fuel/tank[2]/level-gal_us'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/consumables/fuel/tank[3]/level-gal_us'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/gear/gear[1]/position-norm'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/gear/gear[2]/position-norm'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/gear/gear[0]/steering-norm'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/gear/gear[1]/steering-norm'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/gear/gear[2]/steering-norm'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/gear/gear[0]/compression-norm'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/gear/gear[0]/rollspeed-ms'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/gear/gear[1]/rollspeed-ms'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/gear/gear[2]/rollspeed-ms'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/hazards/icing/wing'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/sim/alarms/stall-warning'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/controls/switches/master-avionics'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/engines/engine[0]/running'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/engines/engine[1]/running'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/engines/engine[0]/cranking'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:266:FlightRecorder: Recording non-existent property '/engines/engine[1]/cranking'.
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Aircraft\flightrecorder.cxx:120:FlightRecorder: record size is 460 bytes
systems:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Systems\electrical.cxx:397:No xml-based electrical model specified for this model!
cockpit:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Instrumentation\instrument_mgr.cxx:76:Reading instruments from Path "C:/Users/Luis/Documents/FlightGear/Aircraft/org.flightgear.fgaddon/Aircraft/Citation/Systems/instrumentation.xml"
math:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\math\interpolater.cxx:81:Initializing Interpolator for Path "C:/Program Files/FlightGear 2017.2.1/data/Navaids/range.term"
math:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\math\interpolater.cxx:81:Initializing Interpolator for Path "C:/Program Files/FlightGear 2017.2.1/data/Navaids/range.low"
math:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\math\interpolater.cxx:81:Initializing Interpolator for Path "C:/Program Files/FlightGear 2017.2.1/data/Navaids/range.high"
instruments:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Instrumentation\instrument_mgr.cxx:92:creating default GPS instrument
autopilot:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Autopilot\autopilotgroup.cxx:201:Reading property-rule configuration from Path "C:/Users/Luis/Documents/FlightGear/Aircraft/org.flightgear.fgaddon/Aircraft/Citation/Systems/Citation-autopilot.xml"
autopilot:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Autopilot\autopilotgroup.cxx:208:adding property-rule subsystem Citation II autopilot
autopilot:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Autopilot\autopilotgroup.cxx:201:Reading property-rule configuration from Path "C:/Program Files/FlightGear 2017.2.1/data/Aircraft/Generic/generic-autopilot-helper.xml"
autopilot:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Autopilot\autopilotgroup.cxx:208:adding property-rule subsystem autopilot helpers
autopilot:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Autopilot\autopilotgroup.cxx:201:Reading property-rule configuration from Path "C:/Program Files/FlightGear 2017.2.1/data/Aircraft/Generic/wingflexer.xml"
autopilot:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Autopilot\autopilotgroup.cxx:208:adding property-rule subsystem wing flexer property rule
ai:5:G:\Jenkins\workspace\Windows-release\flightgear\src\AIModel\AIFlightPlanCreatePushBack.cxx:140:Gate doesn't seem to have routes associated with it.
network:3:G:\Jenkins\workspace\Windows-release\flightgear\src\MultiPlayer\multiplaymgr.cxx:913:FGMultiplayMgr - have server
network:3:G:\Jenkins\workspace\Windows-release\flightgear\src\MultiPlayer\multiplaymgr.cxx:930:FGMultiplayMgr::init-txaddress= mpserver01.flightgear.org
network:3:G:\Jenkins\workspace\Windows-release\flightgear\src\MultiPlayer\multiplaymgr.cxx:931:FGMultiplayMgr::init-txport= 5000
network:3:G:\Jenkins\workspace\Windows-release\flightgear\src\MultiPlayer\multiplaymgr.cxx:932:FGMultiplayMgr::init-rxaddress=
network:3:G:\Jenkins\workspace\Windows-release\flightgear\src\MultiPlayer\multiplaymgr.cxx:933:FGMultiplayMgr::init-rxport= 5000
network:3:G:\Jenkins\workspace\Windows-release\flightgear\src\MultiPlayer\multiplaymgr.cxx:934:FGMultiplayMgr::init-callsign= SPN2545
network:5:G:\Jenkins\workspace\Windows-release\flightgear\src\MultiPlayer\multiplaymgr.cxx:957:Multiplayer mode active!
cockpit:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Cockpit\cockpitDisplayManager.cxx:68:Reading cockpit displays from Path "C:/Users/Luis/Documents/FlightGear/Aircraft/org.flightgear.fgaddon/Aircraft/Citation/Systems/instrumentation.xml"
sound:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Sound\voice.cxx:103:creating flite voice
sound:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Sound\flitevoice.cxx:54:FLITEVoice initialized for sample-group 'flite-voice'. Samples will be named 'ATC/Approach/Ground' voice is 'Path "C:/Program Files/FlightGear 2017.2.1/data/ATC/cmu_us_arctic_slt.htsvoice"'
sound:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Sound\voice.cxx:103:creating flite voice
sound:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Sound\flitevoice.cxx:54:FLITEVoice initialized for sample-group 'flite-voice'. Samples will be named 'Pilot' voice is 'Path "C:/Program Files/FlightGear 2017.2.1/data/ATC/cstr_uk_female-1.0.htsvoice"'
sound:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Sound\voice.cxx:103:creating flite voice
sound:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Sound\flitevoice.cxx:54:FLITEVoice initialized for sample-group 'flite-voice'. Samples will be named 'Copilot/Instructor' voice is 'Path "C:/Program Files/FlightGear 2017.2.1/data/ATC/cmu_us_arctic_slt.htsvoice"'
sound:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Sound\voice.cxx:103:creating flite voice
sound:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Sound\flitevoice.cxx:54:FLITEVoice initialized for sample-group 'flite-voice'. Samples will be named 'AI-Plane' voice is 'Path "C:/Program Files/FlightGear 2017.2.1/data/ATC/cmu_us_arctic_slt.htsvoice"'
event:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Time\light.cxx:100:Initializing Lighting interpolation tables.
math:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\math\interpolater.cxx:81:Initializing Interpolator for Path "C:/Program Files/FlightGear 2017.2.1/data/Lighting/ambient"
math:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\math\interpolater.cxx:81:Initializing Interpolator for Path "C:/Program Files/FlightGear 2017.2.1/data/Lighting/diffuse"
math:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\math\interpolater.cxx:81:Initializing Interpolator for Path "C:/Program Files/FlightGear 2017.2.1/data/Lighting/specular"
math:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\math\interpolater.cxx:81:Initializing Interpolator for Path "C:/Program Files/FlightGear 2017.2.1/data/Lighting/sky"
opengl:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Viewer\fg_os_osgviewer.cxx:203:
opengl:4:G:\Jenkins\workspace\Windows-release\flightgear\src\Viewer\fg_os_osgviewer.cxx:203:PNG lib warning : Interlace handling should be turned on when using png_read_image

opengl:4:G:\Jenkins\workspace\Windows-release\flightgear\src\Viewer\fg_os_osgviewer.cxx:203:PNG lib warning : Interlace handling should be turned on when using png_read_image

opengl:4:G:\Jenkins\workspace\Windows-release\flightgear\src\Viewer\fg_os_osgviewer.cxx:203:PNG lib warning : Interlace handling should be turned on when using png_read_image

opengl:4:G:\Jenkins\workspace\Windows-release\flightgear\src\Viewer\fg_os_osgviewer.cxx:203:PNG lib warning : Interlace handling should be turned on when using png_read_image

opengl:4:G:\Jenkins\workspace\Windows-release\flightgear\src\Viewer\fg_os_osgviewer.cxx:203:Warning: Material::setShininess() of 254 is above permitted maximum, clamping to 128.

sound:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\sound\soundmgr_openal.cxx:171:Initializing OpenAL sound manager
view:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Viewer\splash.cxx:678:Splash screen progress finishing-subsystems
nasal:5:G:\Jenkins\workspace\Windows-release\flightgear\src\Scripting\NasalSys.cxx:449:Loading local weather routines...
general:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\canvas\elements\CanvasElement.cxx:284:addEventListener(/sim[0]/gui[0]/canvas[0], mousedown)
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\fg_init.cxx:951:Nasal init took:1909
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Time\TimeManager.cxx:411:After TimeManager::setTimeOffset(): warp = 0
instruments:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Instrumentation\gps.cxx:377:GPS saw route-manager flight-plan replaced.
autopilot:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Autopilot\route_mgr.cxx:812:route manager, current-wp is now -1
ai:3:G:\Jenkins\workspace\Windows-release\flightgear\src\AIModel\AIManager.cxx:161:loading scenario 'nimitz_demo'
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\fg_init.cxx:956:Subsystems postinit took:106
general:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\fg_init.cxx:965:

view:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Viewer\splash.cxx:678:Splash screen progress finalize-position
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:6:0, 49:5
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:504:FGTileMgr: at lon = 6.21321deg, lat = 49.6281deg, elev = -3047.7m, scheduling needed for:6:0, 49:5, visibility=32000
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:293:scheduling needed tiles for 6:0, 49:5, tile-width-m:17981.6, tile-height-m:13914.9
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:5:2, 49:2
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:5:2, 49:3
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:5:2, 49:4
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:5:2, 49:5
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:5:2, 49:6
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:5:2, 49:7
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:5:2, 50:0
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:5:3, 49:2
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:5:3, 49:3
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:5:3, 49:4
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:5:3, 49:5
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:5:3, 49:6
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:5:3, 49:7
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:5:3, 50:0
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:6:0, 49:2
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:6:0, 49:3
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:6:0, 49:4
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:6:0, 49:6
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:6:0, 49:7
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:6:0, 50:0
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:6:1, 49:2
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:6:1, 49:3
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:6:1, 49:4
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:6:1, 49:5
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:6:1, 49:6
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:6:1, 49:7
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:6:1, 50:0
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:6:2, 49:2
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:6:2, 49:3
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:6:2, 49:4
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:6:2, 49:5
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:6:2, 49:6
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:6:2, 49:7
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:6:2, 50:0
terrain:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\scene\tgdb\ReaderWriterSTG.cxx:624:Loading tile 3039954.stg
terrain:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\scene\tgdb\ReaderWriterSTG.cxx:321:Loading stg file Path "C:/Users/Luis/Documents/FlightGear/TerraSync/Terrain/e000n40/e005n49/3039954.stg"
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:504:FGTileMgr: at lon = 6.19556deg, lat = 49.6244deg, elev = -3047.7m, scheduling needed for:6:0, 49:4, visibility=32000
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:293:scheduling needed tiles for 6:0, 49:4, tile-width-m:18027.8, tile-height-m:13914.9
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:5:2, 49:1
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:5:3, 49:1
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:6:0, 49:1
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:6:1, 49:1
terrain:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Scenery\tilemgr.cxx:251:sched_tile: new tile entry for:6:2, 49:1
view:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Viewer\splash.cxx:678:Splash screen progress loading-scenery
environment:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Environment\fgmetar.cxx:153:2017/08/28 20:20 ELLX 282020Z 06003KT CAVOK 22/16 Q1018 NOSIG
environment:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Environment\fgmetar.cxx:157:METAR from tgftp.nws.noaa.gov
terrain:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\scene\tgdb\ReaderWriterSTG.cxx:624:Loading tile 3056352.stg
terrain:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\scene\tgdb\ReaderWriterSTG.cxx:321:Loading stg file Path "C:/Users/Luis/Documents/FlightGear/TerraSync/Objects/e000n40/e006n49/3056352.stg"
terrain:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\scene\tgdb\ReaderWriterSTG.cxx:321:Loading stg file Path "C:/Users/Luis/Documents/FlightGear/TerraSync/Terrain/e000n40/e006n49/3056352.stg"
terrain:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\scene\tgdb\ReaderWriterSTG.cxx:624:Loading tile 3039971.stg
terrain:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\scene\tgdb\ReaderWriterSTG.cxx:321:Loading stg file Path "C:/Users/Luis/Documents/FlightGear/TerraSync/Objects/e000n40/e005n49/3039971.stg"
terrain:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\scene\tgdb\ReaderWriterSTG.cxx:321:Loading stg file Path "C:/Users/Luis/Documents/FlightGear/TerraSync/Terrain/e000n40/e005n49/3039971.stg"
terrain:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\scene\tgdb\ReaderWriterSTG.cxx:624:Loading tile 3056344.stg
terrain:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\scene\tgdb\ReaderWriterSTG.cxx:321:Loading stg file Path "C:/Users/Luis/Documents/FlightGear/TerraSync/Objects/e000n40/e006n49/3056344.stg"
terrain:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\scene\tgdb\ReaderWriterSTG.cxx:321:Loading stg file Path "C:/Users/Luis/Documents/FlightGear/TerraSync/Terrain/e000n40/e006n49/3056344.stg"
terrain:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\scene\tgdb\ReaderWriterSTG.cxx:624:Loading tile 3056353.stg
terrain:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\scene\tgdb\ReaderWriterSTG.cxx:321:Loading stg file Path "C:/Users/Luis/Documents/FlightGear/TerraSync/Objects/e000n40/e006n49/3056353.stg"
terrain:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\scene\tgdb\ReaderWriterSTG.cxx:321:Loading stg file Path "C:/Users/Luis/Documents/FlightGear/TerraSync/Terrain/e000n40/e006n49/3056353.stg"
terrain:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\scene\tgdb\ReaderWriterSTG.cxx:624:Loading tile 3056360.stg
terrain:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\scene\tgdb\ReaderWriterSTG.cxx:321:Loading stg file Path "C:/Users/Luis/Documents/FlightGear/TerraSync/Objects/e000n40/e006n49/3056360.stg"
terrain:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\scene\tgdb\ReaderWriterSTG.cxx:321:Loading stg file Path "C:/Users/Luis/Documents/FlightGear/TerraSync/Terrain/e000n40/e006n49/3056360.stg"
terrain:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\scene\tgdb\ReaderWriterSTG.cxx:624:Loading tile 3039963.stg
terrain:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\scene\tgdb\ReaderWriterSTG.cxx:321:Loading stg file Path "C:/Users/Luis/Documents/FlightGear/TerraSync/Objects/e000n40/e005n49/3039963.stg"
terrain:3:G:\Jenkins\workspace\Windows-release\simgear\simgear\scene\tgdb\ReaderWriterSTG.cxx:321:Loading stg file Path "C:/Users/Luis/Documents/FlightGear/TerraSync/Terrain/e000n40/e005n49/3039963.stg"
flight:3:G:\Jenkins\workspace\Windows-release\flightgear\src\FDM\fdm_shell.cxx:171:Scenery loaded, will init FDM
flight:3:G:\Jenkins\workspace\Windows-release\flightgear\src\FDM\flight.cxx:139:Start common FDM init
flight:3:G:\Jenkins\workspace\Windows-release\flightgear\src\FDM\flight.cxx:146:...initializing position...
flight:3:G:\Jenkins\workspace\Windows-release\flightgear\src\FDM\flight.cxx:158:Checking for lon = 6.19556deg, lat = 49.6244deg, alt = -9999ft
flight:3:G:\Jenkins\workspace\Windows-release\flightgear\src\FDM\flight.cxx:175:...initializing ground elevation to 1190.51ft...
flight:3:G:\Jenkins\workspace\Windows-release\flightgear\src\FDM\flight.cxx:178:...initializing sea-level radius...
flight:3:G:\Jenkins\workspace\Windows-release\flightgear\src\FDM\flight.cxx:181: lat = 49.6244 alt = 1190.61
flight:3:G:\Jenkins\workspace\Windows-release\flightgear\src\FDM\flight.cxx:186:...initializing Euler angles...
flight:3:G:\Jenkins\workspace\Windows-release\flightgear\src\FDM\flight.cxx:195:...initializing velocities...
flight:3:G:\Jenkins\workspace\Windows-release\flightgear\src\FDM\flight.cxx:231:End common FDM init
flight:4:G:\Jenkins\workspace\Windows-release\flightgear\src\FDM\YASim\FGFDM.cpp:241:This aircraft does not use the latest yasim configuration version.
flight:3:G:\Jenkins\workspace\Windows-release\flightgear\src\FDM\YASim\YASim.cxx:65:YASim solution results:
flight:3:G:\Jenkins\workspace\Windows-release\flightgear\src\FDM\YASim\YASim.cxx:66: Iterations: 1194
flight:3:G:\Jenkins\workspace\Windows-release\flightgear\src\FDM\YASim\YASim.cxx:67: Drag Coefficient: 20.8753
flight:3:G:\Jenkins\workspace\Windows-release\flightgear\src\FDM\YASim\YASim.cxx:68: Lift Ratio: 60.2474
flight:3:G:\Jenkins\workspace\Windows-release\flightgear\src\FDM\YASim\YASim.cxx:69: Cruise AoA: 3.28245
flight:3:G:\Jenkins\workspace\Windows-release\flightgear\src\FDM\YASim\YASim.cxx:70: Tail Incidence: -1.59289
flight:3:G:\Jenkins\workspace\Windows-release\flightgear\src\FDM\YASim\YASim.cxx:71:Approach Elevator: -0.835126
flight:3:G:\Jenkins\workspace\Windows-release\flightgear\src\FDM\YASim\YASim.cxx:77: CG: -7.016, -0.000, 0.303
general:4:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\fg_props.cxx:860:fgUntie: unknown property /engines/engine[0]/mp-osi
general:4:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\fg_props.cxx:860:fgUntie: unknown property /engines/engine[0]/oil-temperature-degf
general:4:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\fg_props.cxx:860:fgUntie: unknown property /engines/engine[1]/mp-osi
general:4:G:\Jenkins\workspace\Windows-release\flightgear\src\Main\fg_props.cxx:860:fgUntie: unknown property /engines/engine[1]/oil-temperature-degf
nasal:5:G:\Jenkins\workspace\Windows-release\flightgear\src\Scripting\NasalSys.cxx:449:Electrical System ... ok
nasal:5:G:\Jenkins\workspace\Windows-release\flightgear\src\Scripting\NasalSys.cxx:449:No stored fuel-levels found. Setting to full.
nasal:5:G:\Jenkins\workspace\Windows-release\flightgear\src\Scripting\NasalSys.cxx:449:Chronometer ... Check
view:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Viewer\splash.cxx:678:Splash screen progress
ai:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Traffic\TrafficMgr.cxx:383:parsing traffic in:Path "C:/Program Files/FlightGear 2017.2.1/data/AI/Traffic/A"
ai:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Traffic\TrafficMgr.cxx:383:parsing traffic in:Path "C:/Program Files/FlightGear 2017.2.1/data/AI/Traffic/B"
ai:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Traffic\TrafficMgr.cxx:383:parsing traffic in:Path "C:/Program Files/FlightGear 2017.2.1/data/AI/Traffic/C"
ai:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Traffic\TrafficMgr.cxx:383:parsing traffic in:Path "C:/Program Files/FlightGear 2017.2.1/data/AI/Traffic/D"
ai:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Traffic\TrafficMgr.cxx:383:parsing traffic in:Path "C:/Program Files/FlightGear 2017.2.1/data/AI/Traffic/E"
ai:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Traffic\TrafficMgr.cxx:383:parsing traffic in:Path "C:/Program Files/FlightGear 2017.2.1/data/AI/Traffic/F"
ai:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Traffic\TrafficMgr.cxx:383:parsing traffic in:Path "C:/Program Files/FlightGear 2017.2.1/data/AI/Traffic/G"
ai:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Traffic\TrafficMgr.cxx:383:parsing traffic in:Path "C:/Program Files/FlightGear 2017.2.1/data/AI/Traffic/H"
ai:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Traffic\TrafficMgr.cxx:383:parsing traffic in:Path "C:/Program Files/FlightGear 2017.2.1/data/AI/Traffic/I"
ai:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Traffic\TrafficMgr.cxx:383:parsing traffic in:Path "C:/Program Files/FlightGear 2017.2.1/data/AI/Traffic/J"
ai:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Traffic\TrafficMgr.cxx:383:parsing traffic in:Path "C:/Program Files/FlightGear 2017.2.1/data/AI/Traffic/K"
ai:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Traffic\TrafficMgr.cxx:383:parsing traffic in:Path "C:/Program Files/FlightGear 2017.2.1/data/AI/Traffic/KEQA"
ai:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Traffic\TrafficMgr.cxx:383:parsing traffic in:Path "C:/Program Files/FlightGear 2017.2.1/data/AI/Traffic/L"
ai:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Traffic\TrafficMgr.cxx:383:parsing traffic in:Path "C:/Program Files/FlightGear 2017.2.1/data/AI/Traffic/M"
ai:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Traffic\TrafficMgr.cxx:383:parsing traffic in:Path "C:/Program Files/FlightGear 2017.2.1/data/AI/Traffic/N"
ai:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Traffic\TrafficMgr.cxx:383:parsing traffic in:Path "C:/Program Files/FlightGear 2017.2.1/data/AI/Traffic/O"
ai:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Traffic\TrafficMgr.cxx:383:parsing traffic in:Path "C:/Program Files/FlightGear 2017.2.1/data/AI/Traffic/P"
ai:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Traffic\TrafficMgr.cxx:383:parsing traffic in:Path "C:/Program Files/FlightGear 2017.2.1/data/AI/Traffic/Q"
ai:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Traffic\TrafficMgr.cxx:383:parsing traffic in:Path "C:/Program Files/FlightGear 2017.2.1/data/AI/Traffic/R"
ai:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Traffic\TrafficMgr.cxx:383:parsing traffic in:Path "C:/Program Files/FlightGear 2017.2.1/data/AI/Traffic/S"
ai:3:G:\Jenkins\workspace\Windows-release\flightgear\src\Traffic\TrafficMgr.cxx:383:parsing traffic in:Path "C:/Program Files/FlightGear 2017.2.1/data/AI/Traffic/T"
opengl:4:G:\Jenkins\workspace\Windows-release\flightgear\src\Viewer\fg_os_osgviewer.cxx:203:PNG lib warning : iCCP: known incorrect sRGB profile

opengl:4:G:\Jenkins\workspace\Windows-release\flightgear\src\Viewer\fg_os_osgviewer.cxx:203:PNG lib warning : iCCP: known incorrect sRGB profile


I'm not a genius in this, but i can't find nothing interesting, I hope you can help me, and i very appreciate the support

Bye

(I delatated some of the ''Jenkins'' Of the final

[wkitty42]

I have Win 32, i think i can't run that thing, isn't it @bugman?

it is a bootable CD... your winwhatever will not even be seen or loaded... everything is on the CD... just download the image, burn it to a CD and reboot your machine so that it will boot from the CD... when it loads, memtest86+ will run or will be the only option... run it and leave the machine alone for a long time... it will report any bad memory it finds if there is any... if it find some, then it is a matter of getting a new memory stick and replacing the one bad one...

[wkitty42]

yeah, the log doesn't contain anything that might point us to the problem... i doubt that a higher logging level would help much, either... it will definitely create a lot larger log, though...

[Bulldog 1]

@wkitty42 @bugman I did a Memory test with an .exe of windows, No Memory problems, I think the problem is the x32 of my pc, with other sims like DCS don't let me play cause the x32

[wkitty42]

don't trust those... we used memtest86+ professionally... it was never wrong and runs a whole rack of tests in each of its full loops... memtest86+ tests memory that anything running in the OS just cannot test because it cannot move it out of the way...

[Octal450]

I can also voucher for memtest86+
Every machine I get in for repair gets at least one pass.

Kind Regards,
Josh

[bugman]

You cannot run a RAM checker while MS Windows or any OS is running and have all parts of your RAM sticks checked. That is impossible as the RAM is in use by the OS, and the OS will not release 'protected' parts of it. If you boot from the memtext86+ CD (or USB stick), then there is no OS loaded into memory and your RAM sticks can be thoroughly checked. Again it will probably show nothing, but there is nevertheless a chance that bad RAM is the cause of these crashes.

Regards,
Edward

[Bulldog 1]

But the problem with memtest86+, is that i can't get daemon tools or something like that to run it, and i haven't got USBs or CDs to put it.

[bugman]

You can download an ISO image. This can be burnt onto CD - by a friend if need be. There is also a Download - Auto-installer for USB Key (Win 9x/2k/xp/7) link on the download page - you just need to borrow an empty USB key from someone. This is very simple.

Regards,
Edward

Edit: There are even images for putting on a floppy disk, if you have such a thing nowadays!

[bugman]

Ok, ill try it soon