FlightGear 2020.3.1, Ubuntu 20.04, ATC-pie 1.7.1
After installing dependencies for ATC-pie, FlightGear now crashes whenever trying to fly any aircraft from any location. This happens after rebooting even if ATC-pie has not been run.
There are no error messges and "ps aux" command doesn't show anything running for either program.
Any help?
FlightGear Forum
Board index ‹ FlightGear ‹ Support ‹ Installation ‹ Linux
Flightgear crashes after installing ATC-pie
9 posts
• Page 1 of 1
Flightgear crashes after installing ATC-pie
by RussL » Thu Dec 17, 2020 4:15 pm
- RussL
- Posts: 9
- Joined: Sun Nov 15, 2020 8:03 pm
Re: Flightgear crashes after installing ATC-pie
by RussL » Thu Dec 17, 2020 4:49 pm
Some additional info. If I start fgfs from the command line "fgfs --launcher I get the following when clicking "fly" in Flightgear window :
Now checking for plug-in osgPlugins-3.6.4/osgdb_nvtt.so
17.31 [WARN]:general Enabling ATI/AMD viewport hack
17.43 [INFO]:terrasync Starting automatic scenery download/synchronization to '/home/russl/.fgfs/TerraSync'.
Segmentation fault (core dumped)
Now checking for plug-in osgPlugins-3.6.4/osgdb_nvtt.so
17.31 [WARN]:general Enabling ATI/AMD viewport hack
17.43 [INFO]:terrasync Starting automatic scenery download/synchronization to '/home/russl/.fgfs/TerraSync'.
Segmentation fault (core dumped)
- RussL
- Posts: 9
- Joined: Sun Nov 15, 2020 8:03 pm
Re: Flightgear crashes after installing ATC-pie
by wkitty42 » Thu Dec 17, 2020 6:43 pm
can you try adding "--log-level=debug" to your command line and try again? the log will get big rather quickly... you can then post it to a site like pastebin and link it here... maybe it will provide more info but we won't know without trying...
"You get more air close to the ground," said Angalo. "I read that in a book. You get lots of air low down, and not much when you go up."
"Why not?" said Gurder.
"Dunno. It's frightened of heights, I guess."
"Why not?" said Gurder.
"Dunno. It's frightened of heights, I guess."
-
wkitty42 - Posts: 9162
- Joined: Fri Feb 20, 2015 4:46 pm
- Location: central NC, USA
- Callsign: wk42
- Version: git next
- OS: Kubuntu 22.04
Re: Flightgear crashes after installing ATC-pie
by RussL » Thu Dec 17, 2020 10:53 pm
- RussL
- Posts: 9
- Joined: Sun Nov 15, 2020 8:03 pm
Re: Flightgear crashes after installing ATC-pie
by wkitty42 » Fri Dec 18, 2020 2:48 am
not sure why it mentions MATLAB in there but can you build another one with 2020.3.4 or maybe wait a day or so for 2020.3.5 to hit the streets and try again?
FWIW: i'm not sure the whole log made it into the paste... i saw only 3006 lines...
FWIW: i'm not sure the whole log made it into the paste... i saw only 3006 lines...
"You get more air close to the ground," said Angalo. "I read that in a book. You get lots of air low down, and not much when you go up."
"Why not?" said Gurder.
"Dunno. It's frightened of heights, I guess."
"Why not?" said Gurder.
"Dunno. It's frightened of heights, I guess."
-
wkitty42 - Posts: 9162
- Joined: Fri Feb 20, 2015 4:46 pm
- Location: central NC, USA
- Callsign: wk42
- Version: git next
- OS: Kubuntu 22.04
Re: Flightgear crashes after installing ATC-pie
by RussL » Fri Dec 18, 2020 2:17 pm
Log is 3006 lines with last line "record size is 669 bytes"
I don't have MATLAB, I use Octave.
I started fgfs this morning and got message about 2020.3.4 being available. I downloaded the appimage and it runs ok so far.
Is there anything to know about upgrading over my installed 2020.3.1?
I don't have MATLAB, I use Octave.
I started fgfs this morning and got message about 2020.3.4 being available. I downloaded the appimage and it runs ok so far.
Is there anything to know about upgrading over my installed 2020.3.1?
- RussL
- Posts: 9
- Joined: Sun Nov 15, 2020 8:03 pm
Re: Flightgear crashes after installing ATC-pie
by RussL » Fri Dec 18, 2020 2:30 pm
I have the following ppa:
500 http://ppa.launchpad.net/saiarcot895/flightgear/ubuntu focal/main amd64 Packages
release v=20.04,o=LP-PPA-saiarcot895-flightgear,a=focal,n=focal,l=FlightGear Flight Simulator,c=main,b=amd64
500 http://ppa.launchpad.net/saiarcot895/flightgear/ubuntu focal/main amd64 Packages
release v=20.04,o=LP-PPA-saiarcot895-flightgear,a=focal,n=focal,l=FlightGear Flight Simulator,c=main,b=amd64
- RussL
- Posts: 9
- Joined: Sun Nov 15, 2020 8:03 pm
Re: Flightgear crashes after installing ATC-pie
by wkitty42 » Fri Dec 18, 2020 6:33 pm
RussL wrote in Fri Dec 18, 2020 2:17 pm:Is there anything to know about upgrading over my installed 2020.3.1?
not really... it should drop right in...
"You get more air close to the ground," said Angalo. "I read that in a book. You get lots of air low down, and not much when you go up."
"Why not?" said Gurder.
"Dunno. It's frightened of heights, I guess."
"Why not?" said Gurder.
"Dunno. It's frightened of heights, I guess."
-
wkitty42 - Posts: 9162
- Joined: Fri Feb 20, 2015 4:46 pm
- Location: central NC, USA
- Callsign: wk42
- Version: git next
- OS: Kubuntu 22.04
Re: Flightgear crashes after installing ATC-pie
by wkitty42 » Fri Dec 18, 2020 6:34 pm
RussL wrote in Fri Dec 18, 2020 2:30 pm:I have the following ppa:
500 http://ppa.launchpad.net/saiarcot895/flightgear/ubuntu focal/main amd64 Packages
release v=20.04,o=LP-PPA-saiarcot895-flightgear,a=focal,n=focal,l=FlightGear Flight Simulator,c=main,b=amd64
ok, i didn't know you were using the PPA... weird that it shows MATLAB but i also do not know how it is being built in the PPA...
"You get more air close to the ground," said Angalo. "I read that in a book. You get lots of air low down, and not much when you go up."
"Why not?" said Gurder.
"Dunno. It's frightened of heights, I guess."
"Why not?" said Gurder.
"Dunno. It's frightened of heights, I guess."
-
wkitty42 - Posts: 9162
- Joined: Fri Feb 20, 2015 4:46 pm
- Location: central NC, USA
- Callsign: wk42
- Version: git next
- OS: Kubuntu 22.04
9 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest