Hello Everyone,
I hope this message finds you all well. I have been working on Flightgear and this is one of the issues i have been hung up on for about a month now. In the image below;
3100 ft means we are on the glideslope. Airport is KUNV ( University Park Airport), Runway 24, aircraft is c172p
If you take a look at the image link below, you will notice on the VOR1 located in the cockpit, it shows that we are below the glideslope. This is correct as we are at about 2600 ft which is below the glideslope, so the VOR in the cockpit depicts my actual flight behavior.
On the other hand, if you look at the image you will notice the webpanel, the VOR1 on here shows that we are above the glideslope. Exactly the opposite of what the VOR1 on the cockpit says. Now, every other instrument on the webpanel and cockpit both match up except the VOR1. It seems the VOR1 on the webpanel has the correct magnitude but the wrong direction.
I am hoping someone here has an idea of what could be going on? Or can offer some sort of direction...as to how to fix the VOR1 on the webpanel. The localizer works well and shows the correct thing on both the VOR1 in the cockpit and on the webpanel. It is the glideslope that has this issue.....
The link to the image ->
https://imgur.com/a/8hqxtRX
Thank you so much.