Board index FlightGear Support

ATIS Volume

All general support: help on flying, installation, hardware, getting online etc. There are lots of users and developers to help you out.
Forum rules
In order to help you, we need to know a lot of information. Make sure to include answers to at least the following questions in your initial post.

- what OS (Windows Xp/Vista, Mac etc.) are you running?
- what FlightGear version do you use?
- what graphics card do you have?
- does the problem occur with any aircraft, at any airport?
- where did you download your aircraft/scenery from?
- is there any output printed to the console (black window)?
- copy&paste your commandline (tick the "Show commandline box on the last page of FGRun or the "Others" section on the Mac launcher).

Please report any bugs not specific to an aircraft on the issue tracker.
To run FlightGear on old computers with bad OpenGL support, please take a look at this wiki article.

Note: If you did not get a reponse, even after 7 days, you may want to check out the FlightGear mailing lists to ask your question there.

Re: ATIS Volume

Postby Robertfm » Sun Mar 21, 2021 5:22 pm

OK so we can't use ATIS just the sim weather metadata. Thank you.
Robertfm
 
Posts: 1721
Joined: Thu Apr 25, 2019 5:56 pm
Callsign: RFM1
Version: 2020.3.11
OS: W10 v 19041.746

Re: ATIS Volume

Postby danielHL » Sun Mar 21, 2021 6:17 pm

Yes, we know it is broken and it will be fixed. And then the maintainer can expect a "thank you for fixing this so fast. I realize you are doing this in your free time and just for fun. I apologize if my initial report came across as somewhat demanding, that was not my intention". To which the maintainer could reply "thanks for spotting this, it's nice to see that the plane gets so rigorously tested by the users". If you've never heard the latter, it may be that the former never happened?
danielHL / D-FMPW
danielHL
 
Posts: 280
Joined: Fri May 02, 2014 7:23 pm
Callsign: D-FMPW
Version: next
OS: Linux

Re: ATIS Volume

Postby Robertfm » Sun Mar 21, 2021 6:38 pm

I think you totally misinterpret my posts, plus I was not the only who mentiond. perhaps others are simply too afraid to report issues. I always say thank you when a fix is done.

Edit: Note I said Thanks 4 times I think in the last few replies.
Robertfm
 
Posts: 1721
Joined: Thu Apr 25, 2019 5:56 pm
Callsign: RFM1
Version: 2020.3.11
OS: W10 v 19041.746

Re: ATIS Volume

Postby Robertfm » Mon Mar 22, 2021 7:22 pm

I am writing this here because it concerns another pre-recorded audible issue. I was flying on route to Munich when I started to get Munich ATC giving instructions for planes to start up, push back etc, also it was written instructions. This continues even after I landed and took off again. I haven't knowingly changed any settings and the only thing that stops the audible is to switch off the Master in Sounds menu. Of course that switches off all sounds.

Flight was EGSH EDDM This has never happened before. Any suggestions as where to check would be greatly appreciated. Thank you.

Edit: Flew EDDM ELLX and ATC continued to repeat the same messages over and over again and stopped when I got nav1 for ELLX.
Robertfm
 
Posts: 1721
Joined: Thu Apr 25, 2019 5:56 pm
Callsign: RFM1
Version: 2020.3.11
OS: W10 v 19041.746

Re: ATIS Volume

Postby WoodSTokk » Tue Mar 23, 2021 12:02 am

ATC instructions have to do with AI traffic. I have never used AI traffic so i cant find bugs in there.
I have pushed a update to the PA28 in trunk.
If you want, you can download and try it in 2020.3. The systems should work.
As far as i know the lights in trunk are already updated to Compositor, so you should only fly at daylight.
Compositor lights doesnt work in 2020.3.
But if the systems (comm, nav, ap, ATIS) work as expected, we will backport it to 2020.3.

https://sourceforge.net/p/flightgear/fgaddon/HEAD/tree/trunk/Aircraft/PA28/
WoodSTokk
 
Posts: 1077
Joined: Tue Oct 17, 2017 3:30 pm
Location: Milky Way/Sol/Earth/Europe
Callsign: SX-W57
IRC name: WoodSTokk
Version: 2020.4.0
OS: Debian Bullseye

Re: ATIS Volume

Postby Robertfm » Tue Mar 23, 2021 12:13 am

Thanks for the update I am uncertain how to upload the trunk stuff so I will wait for them to come into FGaddon. I took a look at your link and noticed there's now an SA200 for the x55 autopilot, will that be added to FGaddon.
Robertfm
 
Posts: 1721
Joined: Thu Apr 25, 2019 5:56 pm
Callsign: RFM1
Version: 2020.3.11
OS: W10 v 19041.746

Re: ATIS Volume

Postby Robertfm » Sat Oct 14, 2023 12:21 pm

I am posting here as it is related to ATIS, sort of; I have recently installed Version 18 of FG due to losing Version 11. I am using live weather settings as previously. When I open Weather, then Meta Data it is a new format, for me, the issue is it doesn't appear to update and is stuck on Date 2023/10/1 23.45hrs. Has anyone else noted this. What is the solution.
Robertfm
 
Posts: 1721
Joined: Thu Apr 25, 2019 5:56 pm
Callsign: RFM1
Version: 2020.3.11
OS: W10 v 19041.746

Re: ATIS Volume

Postby wkitty42 » Sat Oct 14, 2023 1:52 pm

which airport is that METAR from?
"You get more air close to the ground," said Angalo. "I read that in a book. You get lots of air low down, and not much when you go up."
"Why not?" said Gurder.
"Dunno. It's frightened of heights, I guess."
User avatar
wkitty42
 
Posts: 9146
Joined: Fri Feb 20, 2015 4:46 pm
Location: central NC, USA
Callsign: wk42
Version: git next
OS: Kubuntu 20.04

Re: ATIS Volume

Postby Robertfm » Sat Oct 14, 2023 2:10 pm

EGPE was my departure airport and it showed as per my previous message. The flight was commenced about 10.30 am. I've just looked now and the date and time for LFAT (en Route ) is now correct.
Robertfm
 
Posts: 1721
Joined: Thu Apr 25, 2019 5:56 pm
Callsign: RFM1
Version: 2020.3.11
OS: W10 v 19041.746

Previous

Return to Support

Who is online

Users browsing this forum: No registered users and 12 guests